Serrated Flange Nut ISO 4161 Black Grade 8 Supplier
Serrated Flange Nut ISO 4161 Black Grade 8. China supplier for M6-M24; packing and documents by RFQ.
Product Overview & Available Options
Taiken supplies Serrated Flange Nut ISO 4161 Black Grade 8 as a China supplier and sourcing partner for B2B fastener orders where ISO 4161, Carbon steel, Black, M6-M24, packing, and document requirements should be confirmed by RFQ.
Taiken supplies ISO 4161 black Grade 8 serrated flange nuts for protected metric assemblies where an ISO-referenced serrated flange nut is specified. The serrated bearing face can bite into the mating surface, so buyers should confirm that surface marking is acceptable on painted, plated, or softer materials.
This page should be differentiated from DIN 6923 zinc plated serrated flange nuts by its ISO purchasing reference and black finish. The black finish should be confirmed as black oxide, blackened, oiled, or another specified treatment, and it should not be treated as a heavy corrosion-protection finish.
As a China supplier for machinery and distributor buyers, Taiken can coordinate ISO 4161 black serrated nuts with compatible bolts, washers where needed, protected packing, carton labels, and documents where applicable.
Dimensions & Technical Data
Key dimensional and mechanical values for this product.
| Specification | Value |
|---|---|
| Standard | ISO 4161 |
| Property Class | Grade 8 |
| Finish | Black |
| Packaging | Bulk carton, small box, private label available |
| Lead Time | Confirmed by order quantity |
| Custom Options | Size, finish, packaging, and label confirmed by RFQ |
| Use Environment | Indoor or protected service; serration marks and black finish type must be accepted by the buyer |
| Specification | Value |
|---|---|
| Thread Size | M6-M24 |
| Material | Carbon steel |
| Matching Bolt | Confirmed by RFQ |
| MOQ | Confirmed by size, class, and order quantity |
| Certification / Documents | ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement |
| Target Applications | ISO machinery assemblies, black fastener assortments, protected equipment panels, MRO replacement lists |
| Buyer Note | Confirm ISO 4161, black finish type, serration acceptance, mating surface, bolt grade, packing, and documents by RFQ |
Materials, Grades & Surface Finishes
Use this item when ISO 4161 black serrated flange nuts are specified and the assembly accepts serration marks.
| Application | Material / Grade / Finish |
|---|---|
| ISO 4161 purchasing reference | Matches ISO-based drawings, stock lists, or customer requirements. |
| Black finish by RFQ | Finish type should be confirmed as black oxide, blackened, oiled, or project-specific wording. |
| Serrated contact behavior | The toothed bearing face can mark coated or soft surfaces and should be approved. |
| Protected assembly focus | Best for indoor machinery or protected assemblies, not severe outdoor exposure by default. |
| Bolt compatibility support | Mating bolt grade and thread size should be checked with the nut requirement. |
Applications & Limitations
Recommended for ISO metric assemblies where serrated locking contact and black protected-service finish are both specified.
ISO machinery assemblies
Used when drawings call for ISO 4161 serrated flange nuts.
Black fastener assortments
Supports importers stocking black metric serrated flange nuts by M size.
Protected equipment panels
Suitable where serration marks are acceptable on the mating surface.
MRO replacement lists
Useful when maintenance teams specify ISO 4161 and black finish.
Quality, Documents, Packaging & Delivery
Our quality coordination covers sourcing, inspection, packaging and documentation.
Inspection & Testing
- Dimensional verification (thread gauge, caliper, micrometer)
- Hardness testing (Rockwell / Brinell)
- Tensile and proof load testing
- Coating thickness measurement
- Visual and surface defect inspection
- Third-party inspection arranged on request
Available Documents
- Mill Test Certificate (EN 10204 3.1)
- Certificate of Conformance
- Inspection Report with photos
- Material Test Report
- Coating / Plating Certificate
- Packing List and commercial documents
Packaging Options
- Bulk carton (25 kg standard)
- Small box (per specification count)
- Plastic bag + carton
- Pallet with stretch wrap or fumigation
- Private label: custom box, label, barcode
- Moisture-resistant packaging on request
MOQ & Delivery
- MOQ confirmed by specification, grade and packaging
- Lead time typically 15–35 days depending on order
- Mixed container with other fastener products
- FOB / CIF / CFR terms available
- Partial shipment and split delivery on request
- Pre-shipment inspection before loading
Frequently Asked Questions
Can ISO 4161 replace DIN 6923?
Only if the drawing or end customer accepts the dimensional and standard substitution.
Will serrations damage the surface?
They can mark painted, plated, aluminum, or softer surfaces, so buyer approval is needed.
Is black finish suitable outdoors?
Usually no. Confirm HDG, zinc plated, or stainless options for outdoor or humid exposure.
What should be confirmed for black finish?
Confirm black oxide, blackened, oiling, packing, and expected storage condition.
Can matching bolts be supplied?
Yes, compatible bolts can be quoted when standard, grade, finish, and quantity are provided.
Let's Discuss Your Fastener Requirements
Send us your specifications, BOM or drawing. We typically respond within 24 business hours.
