DIN 933 / ISO 4017

Fully Threaded Hex Bolt Hot Dip Galvanized 10.9 Supplier

Fully Threaded Hex Bolt Hot Dip Galvanized 10.9. China supplier for M6-M64, length 20-300 mm; packing and documents by RFQ.

Quick Specifications
Standard
DIN 933 / ISO 4017
Size Range
M6-M64, length 20-300 mm
Grade
10.9
Material
Carbon steel
Finish
Hot Dip Galvanized
Thread Type
Fully Threaded

Product Overview & Available Options

Taiken supplies Fully Threaded Hex Bolt Hot Dip Galvanized 10.9 as a China supplier and sourcing partner for B2B fastener orders where DIN 933 / ISO 4017, Carbon steel, Hot Dip Galvanized, M6-M64, length 20-300 mm, packing, and document requirements should be confirmed by RFQ.

Taiken supplies fully threaded hex bolts in hot dip galvanized 10.9 for metric assemblies where DIN 933 or ISO 4017 style geometry and stronger carbon steel fastening are required. HDG is commonly selected for outdoor or exposed steelwork, but thread fit with nuts and coating requirements should be confirmed before order release.

Grade 10.9, bolt length, full thread requirement, galvanizing thickness, mating nut class, washer use, packing, and inspection documents should be checked by RFQ. For engineered or safety-critical joints, the buyer’s drawing and project standard should control acceptance rather than a general product-page description.

As a China supplier serving importers and project suppliers, Taiken can consolidate 10.9 HDG bolts with matching nuts, washers, carton labels, and applicable order documents for Southeast Asia, Middle East, and Central Asia markets.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard DIN 933 / ISO 4017
Thread Type Fully Threaded
Material Carbon steel
Packaging Bulk carton, pallet, custom label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Outdoor or exposed service where HDG and 10.9 class are accepted by the project requirement
Specification Value
Size Range M6-M64, length 20-300 mm
Grade 10.9
Finish Hot Dip Galvanized
MOQ Confirmed by size, grade, and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Outdoor steel fabrication, project bolt packages, heavy distributor stock, infrastructure maintenance
Buyer Note Confirm DIN/ISO requirement, Grade 10.9 suitability, HDG thread fit, nut class, washers, and documents by RFQ

Materials, Grades & Surface Finishes

Use this item when a fully threaded 10.9 metric hex bolt with HDG finish is accepted by the project and mating hardware is confirmed.

Application Material / Grade / Finish
DIN 933 / ISO 4017 reference Supports metric fully threaded hex bolt purchasing lists that use DIN or ISO references.
10.9 strength class Used for stronger metric assemblies after joint design and mating nut class are confirmed.
Hot dip galvanized finish Commonly reviewed for outdoor or exposed steelwork where zinc plating is not enough.
Thread fit after coating HDG affects thread surfaces, so nut fit and any tolerance requirement should be checked.
Project packing and documents Nuts, washers, labels, and inspection records can be aligned to the order requirement.

Applications & Limitations

Recommended for outdoor metric assemblies where 10.9 strength, HDG finish, and nut fit are confirmed.

Outdoor steel fabrication

Used where exposed steel assemblies require stronger metric bolts and hot dip galvanized protection.

Project bolt packages

Can be supplied with matching nuts and washers based on the project's bolt schedule.

Distributor heavy fastener stock

Supports importers carrying DIN/ISO fully threaded HDG bolts across common sizes.

Infrastructure maintenance orders

Useful for replacement when grade, length, thread, and coating requirements are known.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

Do HDG bolts need matching galvanized nuts?

Usually the mating nuts should be confirmed with the bolt finish and thread fit requirement. Do not mix hardware without checking the assembly requirement.

Is 10.9 suitable for every structural joint?

No. The project drawing and engineering requirement decide whether 10.9 is suitable and what inspection documents are needed.

Can all lengths be fully threaded?

This page covers fully threaded hex bolts, but each diameter and length combination should be confirmed by stock or production availability.

What should be checked for galvanizing?

Confirm coating requirement, appearance, thread fit, mating nut class, and any test or inspection requirement before order release.

Can Taiken quote bolt-nut-washer sets?

Yes, sets can be quoted when standards, grades, finishes, sizes, and packing rules are provided.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders