DIN 933 / ISO 4017

Fully Threaded Hex Bolt Hot Dip Galvanized 12.9 Supplier

Fully Threaded Hex Bolt Hot Dip Galvanized 12.9. China supplier for M6-M64, length 20-300 mm; packing and documents by RFQ.

Quick Specifications
Standard
DIN 933 / ISO 4017
Size Range
M6-M64, length 20-300 mm
Grade
12.9
Material
Carbon steel
Finish
Hot Dip Galvanized
Thread Type
Fully Threaded

Product Overview & Available Options

Taiken supplies Fully Threaded Hex Bolt Hot Dip Galvanized 12.9 as a China supplier and sourcing partner for B2B fastener orders where DIN 933 / ISO 4017, Carbon steel, Hot Dip Galvanized, M6-M64, length 20-300 mm, packing, and document requirements should be confirmed by RFQ.

Taiken supplies fully threaded hex bolts in hot dip galvanized 12.9 for project-specific high-strength metric orders where the buyer confirms both the property class and coating acceptance. Because class 12.9 fasteners are high-strength items, coating process, thread fit, and inspection expectations should be reviewed carefully.

Do not assume HDG is suitable for every 12.9 application. The project drawing should confirm whether hot dip galvanizing is allowed, what acceptance criteria apply, and which mating nut and washer grades are required. Diameter, length, full-thread requirement, packing, and documents should be fixed before quotation.

As a China supplier and sourcing coordinator, Taiken can support confirmed 12.9 HDG bolt schedules with matching hardware, labels, packing, and applicable inspection documents for regional industrial and project buyers.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard DIN 933 / ISO 4017
Thread Type Fully Threaded
Material Carbon steel
Packaging Bulk carton, pallet, custom label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Use only where HDG and class 12.9 are approved by project or engineering requirement
Specification Value
Size Range M6-M64, length 20-300 mm
Grade 12.9
Finish Hot Dip Galvanized
MOQ Confirmed by size, grade, and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Confirmed high-strength metric projects, outdoor schedules, industrial replacement, distributor special orders
Buyer Note Confirm class 12.9 suitability, HDG acceptance, nut class, washers, thread fit, and inspection documents by RFQ

Materials, Grades & Surface Finishes

Use this item only when class 12.9 and HDG are both confirmed as acceptable by the buyer's technical requirement.

Application Material / Grade / Finish
High-strength 12.9 class Requires careful confirmation against the drawing, joint design, and acceptance requirement.
HDG suitability review Hot dip galvanizing should be checked for the specific high-strength application before order release.
Full-thread DIN/ISO geometry Supports metric fully threaded hex bolt schedules using DIN 933 or ISO 4017 references.
Mating hardware control Nut class, washer type, and thread fit after coating should be specified with the bolt.
Inspection document planning Testing and certificates are handled where applicable to the batch and project requirement.

Applications & Limitations

Recommended for confirmed high-strength projects where class 12.9, HDG, and mating hardware are all approved.

Engineered high-strength assemblies

Used only where project documents confirm class 12.9 and the permitted coating system.

Outdoor project schedules

Can be reviewed for exposed service when HDG on class 12.9 is accepted by the buyer's standard.

Industrial maintenance replacement

Suitable when existing bolts are clearly specified by grade, finish, length, and nut class.

Distributor special orders

Supports importers handling high-strength metric orders with technical confirmation from the buyer.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

Why does a 12.9 HDG bolt need extra review?

Class 12.9 is high strength, and the coating process plus acceptance criteria must be approved for the application.

Can Taiken guarantee all 12.9 bolts are suitable for HDG?

No. Suitability depends on the project requirement, coating process, and acceptance basis. Confirm these before quotation.

Which nuts should be paired with this bolt?

Nut class and finish must follow the drawing or engineering requirement and should be provided with the RFQ.

Can inspection documents be provided?

They can be reviewed where applicable to the batch and order requirement, especially for high-strength project supply.

What details are required for an accurate quote?

Provide diameter, length, quantity, standard, grade, HDG requirement, mating nuts, washers, destination market, and documents.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders