Fully Threaded Hex Bolt Stainless Steel A4-80 Supplier
Fully Threaded Hex Bolt Stainless Steel A4-80. China supplier for M6-M64, length 20-300 mm; packing and documents by RFQ.
Product Overview & Available Options
Taiken supplies Fully Threaded Hex Bolt Stainless Steel A4-80 as a China supplier and sourcing partner for B2B fastener orders where DIN 933 / ISO 4017, Stainless steel, Plain, M6-M64, length 20-300 mm, packing, and document requirements should be confirmed by RFQ.
Taiken supplies DIN 933 / ISO 4017 stainless steel A4-80 fully threaded hex bolts for metric assemblies that require stronger stainless fastening and higher corrosion resistance than A2 stainless. A4-80 is often reviewed for coastal, humid, or chloride-exposed projects, subject to the buyer’s technical requirement.
Diameter, length, full-thread geometry, A4-80 grade, mating nut material, washer type, packing, and certificates should be confirmed before quotation. For safety-critical or code-controlled joints, the buyer’s project standard should define the required test data and acceptance documents.
As a China supplier and sourcing partner, Taiken can coordinate A4-80 stainless bolts with matching nuts, washers, mixed cartons, labels, and applicable documents for Southeast Asia, Middle East, and Central Asia project channels.
Dimensions & Technical Data
Key dimensional and mechanical values for this product.
| Specification | Value |
|---|---|
| Standard | DIN 933 / ISO 4017 |
| Thread Type | Fully Threaded |
| Material | Stainless steel |
| Packaging | Bulk carton, pallet, custom label available |
| Lead Time | Confirmed by order quantity |
| Custom Options | Size, finish, packaging, and label confirmed by RFQ |
| Use Environment | Humid, coastal, or chloride-exposed service when A4-80 is approved by project requirement |
| Specification | Value |
|---|---|
| Size Range | M6-M64, length 20-300 mm |
| Grade | A4-80 |
| Finish | Plain |
| MOQ | Confirmed by size, grade, and order quantity |
| Certification / Documents | ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement |
| Target Applications | Coastal projects, industrial equipment fastening, A4 distributor ranges, bolt-nut-washer project sets |
| Buyer Note | Confirm A4-80 requirement, diameter, length, mating hardware, load basis, packing, and documents by RFQ |
Materials, Grades & Surface Finishes
Use this item when A4-80 stainless material and fully threaded DIN/ISO metric bolt geometry are required by the project.
| Application | Material / Grade / Finish |
|---|---|
| A4-80 stainless grade | Often selected for more corrosive environments where A2 stainless may not meet the project requirement. |
| Fully threaded metric geometry | Supports DIN 933 / ISO 4017 bolt schedules that require full thread engagement. |
| Mating hardware alignment | Nuts and washers should match the material, strength, and corrosion requirement of the assembly. |
| Project approval boundary | Safety-critical joints should use project-approved load data and inspection requirements. |
| Export document support | Material certificates and inspection reports can be reviewed against actual batch and market requirements. |
Applications & Limitations
Recommended for corrosion-conscious metric assemblies where A4-80 stainless grade and full-thread geometry are both specified.
Coastal and humid projects
Used where A4 stainless is named for improved corrosion resistance in demanding environments.
Industrial equipment fastening
Suitable for pumps, supports, covers, and fixtures when A4-80 is approved by the drawing.
Distributor A4 stainless ranges
Supports importers stocking corrosion-resistant DIN/ISO bolts across several sizes.
Bolt-nut-washer project sets
Can be supplied with matching A4 nuts and washers according to the buyer's schedule.
Quality, Documents, Packaging & Delivery
Our quality coordination covers sourcing, inspection, packaging and documentation.
Inspection & Testing
- Dimensional verification (thread gauge, caliper, micrometer)
- Hardness testing (Rockwell / Brinell)
- Tensile and proof load testing
- Coating thickness measurement
- Visual and surface defect inspection
- Third-party inspection arranged on request
Available Documents
- Mill Test Certificate (EN 10204 3.1)
- Certificate of Conformance
- Inspection Report with photos
- Material Test Report
- Coating / Plating Certificate
- Packing List and commercial documents
Packaging Options
- Bulk carton (25 kg standard)
- Small box (per specification count)
- Plastic bag + carton
- Pallet with stretch wrap or fumigation
- Private label: custom box, label, barcode
- Moisture-resistant packaging on request
MOQ & Delivery
- MOQ confirmed by specification, grade and packaging
- Lead time typically 15–35 days depending on order
- Mixed container with other fastener products
- FOB / CIF / CFR terms available
- Partial shipment and split delivery on request
- Pre-shipment inspection before loading
Frequently Asked Questions
When is A4-80 preferred over A2-70?
A4-80 is usually selected for stronger stainless fastening and more corrosive environments such as coastal or chloride exposure.
Can A4-80 replace carbon steel high-strength bolts?
Only if the drawing and engineering requirement allow it. Material, strength, and corrosion behavior are different.
Do nuts and washers need to be A4 too?
Often they are specified as matching stainless hardware, but the final requirement should come from the buyer's drawing.
Can all sizes be supplied from stock?
Availability depends on diameter, length, grade, and quantity. Each size combination should be confirmed during RFQ.
Which documents should be requested?
Request material certificates, inspection reports, or conformity documents during RFQ so they can be checked against the batch.
Let's Discuss Your Fastener Requirements
Send us your specifications, BOM or drawing. We typically respond within 24 business hours.
