DIN 933 / ISO 4017

Full Thread Hex Bolt Hot Dip Galvanized 8.8 Supplier

Full Thread Hex Bolt Hot Dip Galvanized 8.8. China supplier for M6-M64, length 20-300 mm; packing and documents by RFQ.

Quick Specifications
Standard
DIN 933 / ISO 4017
Size Range
M6-M64, length 20-300 mm
Grade
8.8
Material
Carbon steel
Finish
Hot Dip Galvanized
Thread Type
Full Thread

Product Overview & Available Options

Taiken supplies Full Thread Hex Bolt Hot Dip Galvanized 8.8 as a China supplier and sourcing partner for B2B fastener orders where DIN 933 / ISO 4017, Carbon steel, Hot Dip Galvanized, M6-M64, length 20-300 mm, packing, and document requirements should be confirmed by RFQ.

Taiken supplies full thread hot dip galvanized 8.8 hex bolts for DIN 933 / ISO 4017 metric assemblies that need outdoor corrosion protection and a common medium-strength bolt class. HDG is commonly selected for exposed steelwork where zinc plating is not enough.

Diameter, length, full-thread requirement, Grade 8.8 class, galvanizing condition, mating nut class, washer use, packing, and documents should be confirmed before quotation. For engineered joints, the buyer’s drawing should define the final bolt class and inspection scope.

As a China supplier serving importers and project suppliers, Taiken can consolidate 8.8 HDG full thread bolts with matching nuts, washers, labels, cartons, and applicable documents.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard DIN 933 / ISO 4017
Thread Type Full Thread
Material Carbon steel
Packaging Bulk carton, pallet, custom label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Outdoor or exposed service where Grade 8.8 and HDG finish are accepted
Specification Value
Size Range M6-M64, length 20-300 mm
Grade 8.8
Finish Hot Dip Galvanized
MOQ Confirmed by size, grade, and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Outdoor steel assemblies, DIN/ISO project fastening, HDG distributor stock, bolt-nut-washer sets
Buyer Note Confirm DIN/ISO standard, Grade 8.8, HDG thread fit, nut class, washer use, packing, and documents by RFQ

Materials, Grades & Surface Finishes

Use this item when DIN/ISO full-thread metric bolts in Grade 8.8 and HDG finish are accepted by the project.

Application Material / Grade / Finish
Grade 8.8 metric class A common carbon steel bolt class for many medium-strength metric assemblies.
Full-thread DIN/ISO format Fits purchasing lists requiring DIN 933 or ISO 4017 style fully threaded bolts.
HDG outdoor finish Often used where outdoor exposure requires more protection than zinc plating.
Nut fit confirmation Mating nut class and thread fit after galvanizing should be checked.
Package sourcing support Can be combined with nuts and washers under one packing schedule.

Applications & Limitations

Recommended for outdoor metric assemblies where Grade 8.8, HDG finish, and full-thread geometry are specified.

Outdoor steel assemblies

Used in exposed steelwork where HDG protection is required.

General project fastening

Suitable for confirmed DIN/ISO metric bolt schedules.

Distributor HDG bolt stock

Supports importers carrying common M sizes and lengths.

Bolt-nut-washer sets

Can be packed with matching nuts and washers when the schedule is confirmed.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

Does HDG affect thread fit?

Yes. Thread fit with galvanized nuts should be checked before order release.

When is 8.8 preferred over 10.9?

Use Grade 8.8 when the drawing calls for medium-strength metric bolts rather than higher-strength classes.

Can it be used structurally?

Only when the project standard approves it. Engineered joints need project-specific requirements.

Can Taiken supply matching nuts?

Yes, matching nuts and washers can be quoted with standards, grades, and finishes.

Which documents can be arranged?

Material, inspection, or conformity documents can be reviewed for the actual batch during RFQ.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders