Full Thread Hex Bolt Stainless Steel A2-70 Supplier
Full Thread Hex Bolt Stainless Steel A2-70. China supplier for M6-M64, length 20-300 mm; packing and documents by RFQ.
Product Overview & Available Options
Taiken supplies Full Thread Hex Bolt Stainless Steel A2-70 as a China supplier and sourcing partner for B2B fastener orders where DIN 933 / ISO 4017, Stainless steel, Plain, M6-M64, length 20-300 mm, packing, and document requirements should be confirmed by RFQ.
Taiken supplies full thread hex bolts in stainless steel A2-70 for DIN 933 / ISO 4017 metric assemblies that need stainless material and full thread engagement. A2-70 is commonly selected for clean indoor, humid, and protected exterior conditions where plated carbon steel is not preferred.
Diameter, length, full-thread geometry, A2-70 grade, mating nut material, washer use, packing, and documents should be confirmed before quotation. Coastal, chloride-heavy, or chemical environments should be reviewed for A4 stainless or another approved material.
As a China supplier for importers and distributors, Taiken can coordinate A2-70 bolts with matching nuts, washers, mixed cartons, labels, and applicable order documents.
Dimensions & Technical Data
Key dimensional and mechanical values for this product.
| Specification | Value |
|---|---|
| Standard | DIN 933 / ISO 4017 |
| Thread Type | Full Thread |
| Material | Stainless steel |
| Packaging | Bulk carton, pallet, custom label available |
| Lead Time | Confirmed by order quantity |
| Custom Options | Size, finish, packaging, and label confirmed by RFQ |
| Use Environment | Clean indoor, humid, or protected exterior service; review A4 for coastal or chloride-heavy exposure |
| Specification | Value |
|---|---|
| Size Range | M6-M64, length 20-300 mm |
| Grade | A2-70 |
| Finish | Plain |
| MOQ | Confirmed by size, grade, and order quantity |
| Certification / Documents | ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement |
| Target Applications | Clean equipment, humid indoor applications, A2 distributor stock, matched hardware packages |
| Buyer Note | Confirm A2-70 suitability, diameter, length, mating nuts, washers, packing, and documents by RFQ |
Materials, Grades & Surface Finishes
Use this item when A2-70 stainless grade and DIN/ISO full-thread metric hex bolt geometry are required.
| Application | Material / Grade / Finish |
|---|---|
| A2-70 stainless grade | Commonly used in clean, humid, and protected exterior service. |
| Full-thread geometry | Supports assemblies requiring thread engagement along the bolt shank. |
| Environment boundary | Coastal and chloride-heavy exposure should be reviewed for A4 stainless. |
| Mating hardware review | Nuts and washers should be checked for material and strength compatibility. |
| Mixed-size export support | Can be packed with labels and documents according to buyer requirements. |
Applications & Limitations
Recommended for clean or protected metric assemblies where A2-70 stainless full-thread bolts are accepted.
Clean equipment fastening
Used in covers, brackets, and frames where stainless appearance is required.
Humid indoor applications
A2-70 can suit moderate humidity when chloride exposure is not heavy.
Distributor stainless bolt stock
Supports importers carrying A2 stainless bolts across common sizes.
Matched hardware packages
Can be supplied with A2 nuts and washers by confirmed size list.
Quality, Documents, Packaging & Delivery
Our quality coordination covers sourcing, inspection, packaging and documentation.
Inspection & Testing
- Dimensional verification (thread gauge, caliper, micrometer)
- Hardness testing (Rockwell / Brinell)
- Tensile and proof load testing
- Coating thickness measurement
- Visual and surface defect inspection
- Third-party inspection arranged on request
Available Documents
- Mill Test Certificate (EN 10204 3.1)
- Certificate of Conformance
- Inspection Report with photos
- Material Test Report
- Coating / Plating Certificate
- Packing List and commercial documents
Packaging Options
- Bulk carton (25 kg standard)
- Small box (per specification count)
- Plastic bag + carton
- Pallet with stretch wrap or fumigation
- Private label: custom box, label, barcode
- Moisture-resistant packaging on request
MOQ & Delivery
- MOQ confirmed by specification, grade and packaging
- Lead time typically 15–35 days depending on order
- Mixed container with other fastener products
- FOB / CIF / CFR terms available
- Partial shipment and split delivery on request
- Pre-shipment inspection before loading
Frequently Asked Questions
When should A2-70 be selected?
Use A2-70 when the environment and drawing accept A2 stainless for full-thread metric bolts.
Is A2 suitable near the sea?
Not as a general rule. Coastal or chloride exposure should be reviewed for A4 stainless.
Can this be supplied with nuts?
Yes, compatible nuts and washers can be quoted when standards, grades, and sizes are provided.
Are documents available?
Material or inspection documents can be reviewed for the actual batch when requested during RFQ.
Can A2 replace zinc plated bolts?
Only if the end customer accepts stainless material and cost. Confirm the drawing requirement first.
Let's Discuss Your Fastener Requirements
Send us your specifications, BOM or drawing. We typically respond within 24 business hours.
