Custom / application-based specification

Pan Head Deep Thread Sharp Point Zinc Plated Wood Screw Supplier

Pan Head Deep Thread Sharp Point Zinc Plated Wood Screw. China supplier for #6-#14, length 1/2"-3"; packing and documents by RFQ.

Quick Specifications
Size Range
#6-#14, length 1/2"-3"
Head Type
Pan Head
Drive Type
Phillips cross recess
Point Type
Sharp Point
Material
Carbon steel
Finish
Zinc Plated

Product Overview & Available Options

Taiken supplies Pan Head Deep Thread Sharp Point Zinc Plated Wood Screw as a China supplier and sourcing partner for B2B fastener orders where Custom / application-based specification, Carbon steel, Zinc Plated, #6-#14, length 1/2″-3″, packing, and document requirements should be confirmed by RFQ.

Taiken supplies zinc plated pan head deep thread sharp point wood screws for protected furniture, cabinetry, hinge plates, drawer fittings, light brackets, and repair kits. The pan head gives a raised bearing surface that is easier to inspect after installation and is useful where the head is allowed to remain visible.

This item is not the same as a hex washer head wood screw. Buyers normally choose the pan head style when the assembly needs a neater fixture appearance, screwdriver installation, and moderate clamping on wood-based boards rather than high wrench torque. Diameter, drive recess, head diameter, length, and pilot-hole need should be confirmed by RFQ.

As a China supplier for fastener distributors, Taiken can support # gauge or metric-equivalent size lists, small-box packing, repair assortments, furniture hardware labels, and documents where applicable for Southeast Asia, Middle East, and Central Asia buyers.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard Custom / application-based specification
Head Type Pan Head
Thread Type Deep Thread
Material Carbon steel
Packaging Bulk carton, small box, private label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Dry indoor or protected woodworking; review another coating or screw type for exterior, treated timber, or structural joints
Specification Value
Size Range #6-#14, length 1/2"-3"
Drive Type Phillips cross recess
Point Type Sharp Point
Finish Zinc Plated
MOQ Confirmed by size and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Furniture hardware, cabinet repair, small-box wood screw ranges, light wood fixtures
Buyer Note Confirm pan head diameter, drive recess, # gauge or metric size, length, pilot-hole need, packing style, and documents by RFQ

Materials, Grades & Surface Finishes

Use this item when the buyer needs a visible pan head wood screw for furniture, cabinet, repair, or light fixture fastening in protected conditions.

Application Material / Grade / Finish
Raised pan head for fixture appearance The pan head remains visible and gives a controlled bearing surface for hinges, brackets, plates, and light hardware.
Deep thread for wood engagement Deep thread is intended for wood and wood-based panels after diameter and pilot-hole needs are confirmed.
Screwdriver-driven installation Better suited to hand or power screwdriver assembly than wrench-driven wood connections.
Protected zinc finish Best for dry indoor furniture, cabinetry, and repair applications rather than wet or exterior timber.
Retail and repair packing Can be packed as small boxes, repair assortments, or distributor cartons with size labels.

Applications & Limitations

Best suited to protected furniture and cabinet hardware where a raised pan head is acceptable and installation uses a screwdriver drive.

Furniture hardware fixing

Used for hinges, handles, brackets, drawer slides, and plates where the screw head remains visible.

Cabinet and panel repair

Suitable for protected cabinet repairs and board fastening when deep thread engagement is needed.

Small-box distributor ranges

Supports buyers stocking common pan head wood screw sizes for retail or trade counters.

Light fixture fastening to wood

Useful for light-duty wood fixtures where a hex washer head would be too bulky or visually intrusive.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

When should I choose pan head instead of hex washer head?

Choose pan head when the fixing is lighter, the head remains visible, and screwdriver installation is preferred over wrench torque.

Is this suitable for structural timber joints?

No. It is better treated as a furniture, cabinet, repair, or light fixture screw unless the buyer provides a structural specification.

Can this screw be used outdoors?

Zinc plating is mainly for dry or protected service. Outdoor, wet, treated timber, or coastal use needs coating review.

What details define the head style?

Confirm head diameter, head height, drive recess, diameter, length, thread, point, and packing requirement.

Can Taiken prepare repair-kit packing?

Yes, small boxes or mixed repair assortments can be reviewed when sizes, quantities, labels, and MOQ are confirmed.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders