Wafer Head Self-Drilling Yellow Zinc Screw Supplier
Wafer Head Self-Drilling Yellow Zinc Screw. China supplier for #6, #8, #10 (3.5-4.8 mm), length 25-75 mm; packing and documents by RFQ.
Product Overview & Available Options
Taiken supplies Wafer Head Self-Drilling Yellow Zinc Screw for drywall and plasterboard installation where gypsum board is fastened to protected light-gauge metal fastening where yellow zinc appearance is specified. Wafer head provides low-profile bearing where a bugle head is not required. Self-drilling point type should be matched to metal thickness before order release.
The yellow zinc finish should be matched to dry interior or protected use unless another coating is confirmed. Wet areas, exterior sheathing, heavy steel, or treated timber need a separate screw and coating review.
As a China supplier for drywall screw distributors, Taiken can support common # gauge sizes, metric equivalents, contractor cartons, labels, and applicable order documents.
Dimensions & Technical Data
Key dimensional and mechanical values for this product.
| Specification | Value |
|---|---|
| Standard | ASTM C1002 / application-based specification |
| Head Type | Wafer Head |
| Point Type | Self-Drilling |
| Finish | Yellow Zinc |
| MOQ | Confirmed by size and order quantity |
| Certification / Documents | ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement |
| Target Applications | Drywall fastening to protected light-gauge metal fastening where yellow zinc appearance is specified, interior partition projects, distributor stock, contractor cartons |
| Buyer Note | Confirm # gauge or metric equivalent, length, drive, thread, point, substrate thickness, finish, packing, and documents by RFQ |
| Specification | Value |
|---|---|
| Size Range | #6, #8, #10 (3.5-4.8 mm), length 25-75 mm |
| Drive Type | Phillips cross recess |
| Material | Carbon steel |
| Packaging | Bulk carton, small box, private label available |
| Lead Time | Confirmed by order quantity |
| Custom Options | Size, finish, packaging, and label confirmed by RFQ |
| Use Environment | Indoor or protected service; yellow zinc is not a coastal or severe-exposure coating by default |
Materials, Grades & Surface Finishes
This carbon steel wafer head self-drilling screw is for drywall fastening to protected light-gauge metal framing where a yellow zinc appearance is specified, with thread, point, finish, and substrate thickness confirmed.
| Application | Material / Grade / Finish |
|---|---|
| Drywall application focus | Intended for gypsum board fastening to protected light-gauge metal fastening where yellow zinc appearance is specified, not general structural fastening. |
| Thread selection | Wafer head provides low-profile bearing where a bugle head is not required. |
| Point selection | Self-drilling point type should be matched to metal thickness before order release. |
| Yellow zinc finish boundary | Yellow zinc should be checked against indoor, protected, or project-specific exposure. |
| Contractor packing support | Bulk cartons, inner boxes, labels, and mixed sizes can be reviewed by order. |
Applications & Limitations
Recommended for drywall projects where substrate type, screw length, thread, point, finish, and packing are defined.
Drywall board installation
Used for gypsum board fixed to protected light-gauge metal fastening where yellow zinc appearance is specified after length and board thickness are confirmed.
Interior partition projects
Suitable for dry or protected interior work when the coating is accepted.
Distributor drywall screw stock
Supports importers stocking common #6, #8, and #10 sizes.
Contractor site cartons
Can be packed for jobsite use with clear size and finish labels.
Quality, Documents, Packaging & Delivery
Our quality coordination covers sourcing, inspection, packaging and documentation.
Inspection & Testing
- Dimensional verification (thread gauge, caliper, micrometer)
- Hardness testing (Rockwell / Brinell)
- Tensile and proof load testing
- Coating thickness measurement
- Visual and surface defect inspection
- Third-party inspection arranged on request
Available Documents
- Mill Test Certificate (EN 10204 3.1)
- Certificate of Conformance
- Inspection Report with photos
- Material Test Report
- Coating / Plating Certificate
- Packing List and commercial documents
Packaging Options
- Bulk carton (25 kg standard)
- Small box (per specification count)
- Plastic bag + carton
- Pallet with stretch wrap or fumigation
- Private label: custom box, label, barcode
- Moisture-resistant packaging on request
MOQ & Delivery
- MOQ confirmed by specification, grade and packaging
- Lead time typically 15–35 days depending on order
- Mixed container with other fastener products
- FOB / CIF / CFR terms available
- Partial shipment and split delivery on request
- Pre-shipment inspection before loading
Frequently Asked Questions
Which substrate is this screw for?
It should be selected for protected light-gauge metal fastening where yellow zinc appearance is specified; confirm if your project uses a different substrate.
Can it be used outdoors?
Not without coating review. Drywall screws are usually for dry interior or protected applications.
What size notation should be used?
Many drywall screw lists use # gauge and inch lengths, with metric equivalents added for importers.
Can Taiken supply mixed sizes?
Yes, mixed sizes can be reviewed with MOQ, labels, and carton requirements.
What should be included in the RFQ?
Send diameter, length, thread, point, finish, substrate, packing, and document requirements.
Which diameters and lengths are typical?
Typical diameters are #6, #8, and #10 (3.5-4.8 mm) with lengths from 25 to 75 mm; combinations are reviewed and confirmed by RFQ.
Let's Discuss Your Fastener Requirements
Send us your specifications, BOM or drawing. We typically respond within 24 business hours.
