Custom / application-based specification

Zinc Plated Wafer Head Fine Thread Self-Drilling Screw Supplier

Zinc Plated Wafer Head Fine Thread Self-Drilling Screw. China supplier for ST3.5-ST6.3, length 13-150 mm; packing and documents by RFQ.

Quick Specifications
Size Range
ST3.5-ST6.3, length 13-150 mm
Head Type
Wafer Head
Drive Type
Phillips cross recess
Point Type
Self-Drilling
Material
Carbon steel
Finish
Zinc Plated

Product Overview & Available Options

Taiken supplies zinc plated wafer head fine thread self-drilling screws for light-gauge metal fastening where a low-profile, broad head is preferred. The fine thread and self-drilling point should be matched to metal thickness, substrate type, and installation speed.

Wafer head diameter, drive, point type, fine thread requirement, length, zinc finish, and packing should be confirmed before quotation. This screw is mainly for protected metal assemblies and should not be used as a generic outdoor or structural fastener without project review.

As a China supplier for screw distributors and project buyers, Taiken can coordinate common ST sizes, boxed packing, carton labels, and order documents for Southeast Asia, Middle East, and Central Asia markets.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard Custom / application-based specification
Head Type Wafer Head
Thread Type Fine Thread
Material Carbon steel
Packaging Bulk carton, small box, private label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Indoor or protected light-gauge metal fastening; review coating for exterior or coastal exposure
Specification Value
Size Range ST3.5-ST6.3, length 13-150 mm
Drive Type Phillips cross recess
Point Type Self-Drilling
Finish Zinc Plated
MOQ Confirmed by size and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Metal tracks, protected fixtures, self-drilling distributor ranges, MRO replacement
Buyer Note Confirm wafer head size, drive, fine thread, point type, substrate thickness, length, and packing by RFQ

Materials, Grades & Surface Finishes

<p>Use these carbon steel zinc plated wafer head fine thread self-drilling screws when a low-profile broad head and fine thread are required for protected light-gauge metal fastening.</p>

Application Material / Grade / Finish
Wafer head low profile Useful where a broad low head is needed without a countersunk seat.
Fine thread for metal Fine thread is typically selected for suitable light-gauge metal substrates.
Point matched to substrate Drilling capacity should be confirmed from metal thickness and material.
Zinc plated protected finish Best for indoor or sheltered assemblies unless another coating is approved.
Resale packing support Can be supplied in boxes or cartons with labels and mixed lengths.

Applications & Limitations

Recommended for protected light-gauge metal fastening where low-profile head shape and fine thread are specified.

Metal track and channel work

Used where low head height is needed on suitable light-gauge metal parts.

Fixture and bracket fastening

Works for protected fixtures after point and thread are matched to substrate thickness.

Distributor self-drilling ranges

Supports importers carrying wafer head screws across common ST sizes.

MRO screw replacement

Useful when the existing screw head, thread, point, and finish are known.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

When should wafer head be chosen?

Choose wafer head when the assembly needs a broad, low-profile head rather than a hex or pan head.

What does fine thread mean for use?

Fine thread is generally matched with metal substrates, but substrate thickness and point type still need confirmation.

Can this be used outdoors?

Zinc plating is mainly for protected service. Outdoor exposure needs coating and corrosion review.

Can drive type be specified?

Yes, drive type should be included in the RFQ along with point, length, and packing.

Can Taiken quote private-label boxes?

Box labels and carton marks can be reviewed when quantity and market requirements are confirmed.

Which sizes can be supplied?

Typical sizes from ST3.5 to ST6.3 with lengths from 13 mm to 150 mm can be reviewed and confirmed by RFQ.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders