Custom / application-based specification

Hex Washer Head Self-Drilling Screw Yellow Zinc Supplier

Hex Washer Head Self-Drilling Screw Yellow Zinc. China supplier for ST3.5-ST6.3, length 13-150 mm; packing and documents by RFQ.

Quick Specifications
Size Range
ST3.5-ST6.3, length 13-150 mm
Head Type
Hex Washer Head
Drive Type
Phillips cross recess
Point Type
Self-Drilling
Material
Carbon steel
Finish
Yellow Zinc

Product Overview & Available Options

Taiken supplies Hex Washer Head Self-Drilling Screw Yellow Zinc as a China supplier and sourcing partner for B2B fastener orders where Custom / application-based specification, Carbon steel, Yellow Zinc, ST3.5-ST6.3, length 13-150 mm, packing, and document requirements should be confirmed by RFQ.

Taiken supplies yellow zinc hex washer head self-drilling screws for protected metal fastening where hex drive installation and wider head bearing are preferred. The point type, washer requirement, and thread should be matched to the metal substrate and exposure condition.

Drive size, screw diameter, length, drill point, washer or sealing requirement, yellow zinc finish, packing, and documents should be confirmed before quotation. Yellow zinc should not be promoted as a universal exterior roofing or coastal solution without coating and sealing review.

As a China supplier and consolidated sourcing partner, Taiken can supply hex washer head self-drilling screws with mixed sizes, labels, cartons, and applicable order documents for regional importers.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard Custom / application-based specification
Head Type Hex Washer Head
Point Type Self-Drilling
Finish Yellow Zinc
MOQ Confirmed by size and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Metal sheet fastening, protected cladding, yellow zinc distributor ranges, replacement packs
Buyer Note Confirm drive size, drill point, washer need, substrate thickness, finish, packing, and documents by RFQ
Specification Value
Size Range ST3.5-ST6.3, length 13-150 mm
Drive Type Phillips cross recess
Material Carbon steel
Packaging Bulk carton, small box, private label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Indoor or protected service; review coating and washer for exterior, roofing, or coastal exposure

Materials, Grades & Surface Finishes

<p>Use these carbon steel hex washer head self-drilling screws with yellow zinc finish when hex drive installation and a wider bearing face are specified for protected metal fastening.</p>

Application Material / Grade / Finish
Hex washer head drive Supports hex drive installation and a wider bearing face.
Washer requirement by application Sealing washers should be specified when weather sealing is required.
Self-drilling point matching Drilling capacity depends on point type, diameter, and substrate thickness.
Yellow zinc protected finish Selected for appearance and protected service, not severe corrosion exposure.
Distributor packing options Boxed, bulk, labeled, or mixed-size packing can be reviewed by order.

Applications & Limitations

Recommended for protected metal fastening where hex drive, washer need, finish color, and point type are confirmed.

Metal sheet fastening

Used where installers need hex drive torque on suitable sheet-metal assemblies.

Protected cladding and fixtures

Can be used in sheltered cladding or fixtures after washer and coating needs are checked.

Distributor yellow zinc ranges

Supports importers stocking yellow zinc screw lines for resale.

Maintenance replacement packs

Useful for replacing existing screws by head type, point, and finish.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

Does this product include a sealing washer?

Only if specified. Washer material and sealing requirement should be included in the RFQ.

Can it be used for roofing?

Roofing exposure needs coating and sealing review. Yellow zinc alone may not be enough.

How is drill point selected?

Point type depends on substrate material and thickness. Provide installation details for confirmation.

Can Taiken pack mixed lengths?

Yes, mixed lengths can be reviewed with MOQ, labels, and carton rules.

Which documents can be supplied?

Inspection or material documents can be reviewed where applicable to the actual order.

What diameter and length range is available?

Typical sizes from ST3.5 to ST6.3 with lengths from 13 mm to 150 mm can be reviewed and confirmed by RFQ.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders