Custom / application-based specification

Hex Washer Head Self-Drilling Screw Zinc Plated Supplier

Hex Washer Head Self-Drilling Screw Zinc Plated. China supplier for ST3.5-ST6.3, length 13-150 mm; packing and documents by RFQ.

Quick Specifications
Size Range
ST3.5-ST6.3, length 13-150 mm
Head Type
Hex Washer Head
Drive Type
Phillips cross recess
Point Type
Self-Drilling
Material
Carbon steel
Finish
Zinc Plated

Product Overview & Available Options

Taiken supplies Hex Washer Head Self-Drilling Screw Zinc Plated as a China supplier and sourcing partner for B2B fastener orders where Custom / application-based specification, Carbon steel, Zinc Plated, ST3.5-ST6.3, length 13-150 mm, packing, and document requirements should be confirmed by RFQ.

Taiken supplies zinc plated hex washer head self-drilling screws for metal fastening where a hex drive and wider bearing face are preferred. This head style is common in sheet-metal, cladding, and general fixture work, but washer sealing, coating, and drilling capacity must be confirmed by application.

Thread size, length, drill point, washer requirement, drive size, zinc finish, packing, and documents should be confirmed before quotation. Zinc plated screws should not be promoted as a universal exterior or coastal fastener without reviewing coating and sealing expectations.

As a China supplier and consolidated sourcing partner, Taiken can provide hex washer head self-drilling screws with controlled packing, labels, mixed sizes, and applicable order documents for regional importers.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard Custom / application-based specification
Head Type Hex Washer Head
Point Type Self-Drilling
Finish Zinc Plated
MOQ Confirmed by size and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Sheet-metal fixing, protected cladding, distributor screw stock, maintenance fastening
Buyer Note Confirm drill point, washer need, drive size, substrate thickness, finish, packing, and documents by RFQ
Specification Value
Size Range ST3.5-ST6.3, length 13-150 mm
Drive Type Phillips cross recess
Material Carbon steel
Packaging Bulk carton, small box, private label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Indoor or protected metal fastening; review coating and washer for exterior or coastal exposure

Materials, Grades & Surface Finishes

<p>Use these carbon steel hex washer head self-drilling screws with zinc plated finish when hex drive installation and a wider head are required for protected metal fastening.</p>

Application Material / Grade / Finish
Hex washer head drive Supports higher installation torque and a wider bearing face than smaller head styles.
Self-drilling selection Point type and drilling capacity should match the metal thickness and installation tool.
Washer requirement by RFQ Sealing washer type should be specified if weather sealing is required.
Zinc plated protected finish Suitable for indoor or sheltered use unless another coating is confirmed.
Bulk and box packing Can support distributor cartons, labels, and mixed-size shipments.

Applications & Limitations

Recommended for protected metal fastening where hex drive, bearing face, and point type are confirmed.

Sheet-metal fixing

Used where installers prefer hex drive torque for suitable sheet-metal assemblies.

Cladding and light frames

Can be used in protected cladding or light frame work after coating and washer needs are checked.

Distributor screw stock

Supports importers stocking ST sizes and lengths for resale.

Maintenance fastening

Useful for replacing common hex washer head self-drilling screws by size and finish.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

Does this include an EPDM washer?

Only if specified. The washer type and sealing requirement should be included in the RFQ.

Can it be used outdoors?

Outdoor use depends on coating, washer, substrate, and exposure. Zinc plating alone may not be enough.

What drill point is needed?

Point selection depends on metal thickness and hardness. Provide substrate details for confirmation.

Can Taiken supply multiple lengths?

Yes, multiple lengths can be quoted when quantity, packing, and MOQ are confirmed.

What documents can be provided?

Inspection or material documents can be reviewed where applicable to the actual batch and order.

What sizes can be quoted?

Typical sizes from ST3.5 to ST6.3 in diameter and 13 mm to 150 mm in length can be reviewed and confirmed by RFQ.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders