Custom / application-based specification

Pan Head Self-Drilling Screw Zinc Plated Supplier

Pan Head Self-Drilling Screw Zinc Plated. China supplier for ST3.5-ST6.3, length 13-150 mm; packing and documents by RFQ.

Quick Specifications
Size Range
ST3.5-ST6.3, length 13-150 mm
Head Type
Pan Head
Drive Type
Phillips cross recess
Point Type
Self-Drilling
Material
Carbon steel
Finish
Zinc Plated

Product Overview & Available Options

Taiken supplies Pan Head Self-Drilling Screw Zinc Plated as a China supplier and sourcing partner for B2B fastener orders where Custom / application-based specification, Carbon steel, Zinc Plated, ST3.5-ST6.3, length 13-150 mm, packing, and document requirements should be confirmed by RFQ.

Taiken supplies zinc plated pan head self-drilling screws for protected sheet-metal and light-gauge metal fastening where a low-to-medium profile pan head is required. The self-drilling point can reduce pre-drilling, but point type and drilling capacity must match the substrate thickness.

Head diameter, drive type, drill point number, thread, length, zinc finish, and packing should be confirmed before quotation. Zinc plated carbon steel is mainly for indoor or protected service and should not be positioned as a coastal or long-term exterior roofing solution without coating review.

As a China supplier for fastener distributors and project buyers, Taiken can coordinate self-drilling screw sizes, cartons, labels, and applicable documents for Southeast Asia, Middle East, and Central Asia import programs.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard Custom / application-based specification
Head Type Pan Head
Point Type Self-Drilling
Finish Zinc Plated
MOQ Confirmed by size and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Light-gauge metal fixtures, protected sheet-metal assembly, distributor screw ranges, MRO repair packs
Buyer Note Confirm head style, drive, drill point, substrate thickness, length, finish, and packing by RFQ
Specification Value
Size Range ST3.5-ST6.3, length 13-150 mm
Drive Type Phillips cross recess
Material Carbon steel
Packaging Bulk carton, small box, private label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Indoor or protected metal fastening; review coating for exterior, roofing, or coastal exposure

Materials, Grades & Surface Finishes

<p>Use these carbon steel pan head self-drilling screws with zinc plated finish for protected sheet-metal and light-gauge metal fastening.</p>

Application Material / Grade / Finish
Pan head bearing surface Provides a rounded head style for fixtures and sheet-metal fastening where a flush countersink is not required.
Self-drilling point control Drill point type should match substrate thickness and installation speed expectations.
Zinc plated protected finish Best suited to indoor or sheltered metal assemblies rather than severe outdoor exposure.
Drive and thread confirmation Drive type, thread, length, and point number should be fixed before quotation.
Distributor packing support Common screw sizes can be packed for resale with labels and carton marks.

Applications & Limitations

Recommended for protected sheet-metal fastening where pan head geometry and drilling capacity are specified.

Light-gauge metal fixtures

Used to fasten brackets, covers, and fixtures to suitable metal substrates.

Protected sheet-metal assembly

Suitable when zinc plating meets the indoor or sheltered environment requirement.

Distributor screw ranges

Supports importers carrying multiple ST sizes and lengths in box or carton packing.

MRO repair packs

Useful for maintenance buyers replacing common self-drilling screws by size.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

Can this screw drill every metal thickness?

No. Drilling capacity depends on point type, diameter, material, and substrate thickness.

Is zinc plating suitable for roofing?

Only for protected or temporary expectations. Exposed roofing often needs a coating and sealing review.

What point number should be selected?

Provide the substrate thickness and material so the drill point can be confirmed.

Can packing be customized?

Yes, box quantity, carton labels, barcode needs, and mixed sizes can be reviewed.

What details are needed for RFQ?

Send head style, drive, point type, diameter, length, finish, substrate thickness, packing, and documents.

Which screw sizes are available?

Typical sizes from ST3.5 to ST6.3 with lengths from 13 mm to 150 mm can be reviewed and confirmed by RFQ.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders