Wafer Head Self-Drilling Screw Yellow Zinc Supplier
Wafer Head Self-Drilling Screw Yellow Zinc. China supplier for ST3.5-ST6.3, length 13-150 mm; packing and documents by RFQ.
Product Overview & Available Options
Taiken supplies Wafer Head Self-Drilling Screw Yellow Zinc as a China supplier and sourcing partner for B2B fastener orders where Custom / application-based specification, Carbon steel, Yellow Zinc, ST3.5-ST6.3, length 13-150 mm, packing, and document requirements should be confirmed by RFQ.
Taiken supplies yellow zinc wafer head self-drilling screws for protected light-gauge metal fastening where a broad, low-profile head is useful. The self-drilling point and thread should be matched to substrate thickness and installation conditions before quotation.
Head size, drive type, drill point, thread, length, yellow zinc finish, packing, and substrate details should be confirmed by RFQ. Yellow zinc is mainly a protected-service finish and should not be treated as a severe outdoor or coastal coating.
As a China supplier for fastener distributors, Taiken can coordinate wafer head self-drilling screw sizes, private labels, retail boxes, cartons, and applicable order documents for regional markets.
Dimensions & Technical Data
Key dimensional and mechanical values for this product.
| Specification | Value |
|---|---|
| Standard | Custom / application-based specification |
| Head Type | Wafer Head |
| Point Type | Self-Drilling |
| Finish | Yellow Zinc |
| MOQ | Confirmed by size and order quantity |
| Certification / Documents | ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement |
| Target Applications | Light-gauge metal fastening, protected fixtures, distributor screw stock, retail boxes |
| Buyer Note | Confirm wafer head size, drive, drill point, substrate thickness, yellow zinc finish, packing, and documents by RFQ |
| Specification | Value |
|---|---|
| Size Range | ST3.5-ST6.3, length 13-150 mm |
| Drive Type | Phillips cross recess |
| Material | Carbon steel |
| Packaging | Bulk carton, small box, private label available |
| Lead Time | Confirmed by order quantity |
| Custom Options | Size, finish, packaging, and label confirmed by RFQ |
| Use Environment | Indoor or protected service; review coating for exterior or coastal exposure |
Materials, Grades & Surface Finishes
<p>Use these carbon steel wafer head self-drilling screws with yellow zinc finish when a broad, low-profile head is required for protected light-gauge metal fastening.</p>
| Application | Material / Grade / Finish |
|---|---|
| Wafer head low-profile shape | Useful where broad head coverage and lower height are preferred. |
| Self-drilling point selection | Point type should be matched to metal thickness and substrate material. |
| Yellow zinc appearance | Often selected for appearance or customer preference in protected applications. |
| Protected-use finish | Not a default solution for coastal or long-term exterior exposure. |
| Retail packing support | Labels, inner boxes, and carton marks can be reviewed by order quantity. |
Applications & Limitations
Recommended for protected light-gauge metal fastening where wafer head shape, point type, and finish color are confirmed.
Light-gauge metal fastening
Used where a wafer head can hold fixtures or sheets on suitable metal substrates.
Protected fixture work
Suitable for indoor or sheltered assemblies after drill point and length are confirmed.
Distributor screw stock
Supports importers stocking yellow zinc self-drilling screws by size.
Retail and trade boxes
Can be packed for resale with labels and carton marks.
Quality, Documents, Packaging & Delivery
Our quality coordination covers sourcing, inspection, packaging and documentation.
Inspection & Testing
- Dimensional verification (thread gauge, caliper, micrometer)
- Hardness testing (Rockwell / Brinell)
- Tensile and proof load testing
- Coating thickness measurement
- Visual and surface defect inspection
- Third-party inspection arranged on request
Available Documents
- Mill Test Certificate (EN 10204 3.1)
- Certificate of Conformance
- Inspection Report with photos
- Material Test Report
- Coating / Plating Certificate
- Packing List and commercial documents
Packaging Options
- Bulk carton (25 kg standard)
- Small box (per specification count)
- Plastic bag + carton
- Pallet with stretch wrap or fumigation
- Private label: custom box, label, barcode
- Moisture-resistant packaging on request
MOQ & Delivery
- MOQ confirmed by specification, grade and packaging
- Lead time typically 15–35 days depending on order
- Mixed container with other fastener products
- FOB / CIF / CFR terms available
- Partial shipment and split delivery on request
- Pre-shipment inspection before loading
Frequently Asked Questions
What is wafer head used for?
Wafer head provides a broad, low-profile bearing surface for suitable metal fastening.
Can it drill thick steel?
Only if the drill point and screw diameter match the substrate. Provide thickness and material for confirmation.
Is yellow zinc outdoor rated?
Usually it is for protected service. Outdoor or coastal exposure needs coating review.
Can packing be customized?
Yes, labels, boxes, carton marks, and mixed-size packing can be reviewed.
What details are needed?
Send drive, point type, diameter, length, finish, substrate thickness, packing, and document needs.
What size range is offered?
Typical diameters from ST3.5 to ST6.3 with lengths from 13 mm to 150 mm can be reviewed and confirmed by RFQ.
Let's Discuss Your Fastener Requirements
Send us your specifications, BOM or drawing. We typically respond within 24 business hours.
