DIN 7991 / ISO 10642 / project specification

Flat Head Socket Cap Screw Black 10.9 Supplier

Flat Head Socket Cap Screw Black 10.9. China supplier for M3-M24, length 6-150 mm; packing and documents by RFQ.

Quick Specifications
Size Range
M3-M24, length 6-150 mm
Head Type
Flat Head
Drive Type
Hex socket
Material
Carbon steel
Finish
Black

Product Overview & Available Options

Taiken supplies Flat Head Socket Cap Screw Black 10.9 as a China supplier and sourcing partner for B2B fastener orders where DIN 7991 / ISO 10642 / project specification, Carbon steel, Black, M3-M24, length 6-150 mm, packing, and document requirements should be confirmed by RFQ.

Taiken supplies black Grade 10.9 flat head socket cap screws for countersunk machinery assemblies, tooling plates, clamping fixtures, and protected equipment where higher strength than Grade 8.8 is required. The flat head must match the countersink seat, and the black finish should be defined before quotation.

This product differs from zinc plated 8.8 flat head screws because the decision is driven by Grade 10.9 strength, black finish appearance or internal machinery preference, and countersink geometry. Black finish is not a corrosion coating by itself, so storage, oiling, and service environment should be confirmed.

As a China supplier for machinery fastener importers, Taiken can provide black 10.9 flat head socket screws with anti-rust packing, small boxes, carton labels, and inspection documents where applicable.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard DIN 7991 / ISO 10642 / project specification
Head Type Flat Head
Material Carbon steel
Packaging Bulk carton, small box, private label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Indoor or protected machinery service; confirm oiling or another coating for humid storage or outdoor exposure
Specification Value
Size Range M3-M24, length 6-150 mm
Drive Type Hex socket
Finish Black
MOQ Confirmed by size and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Tooling fixtures, machined equipment plates, black socket screw assortments, MRO replacement orders
Buyer Note Confirm DIN 7991 / ISO 10642, Grade 10.9, black finish type, countersink angle, socket size, anti-rust packing, and documents by RFQ

Materials, Grades & Surface Finishes

Use this item when Grade 10.9 black flat head socket screws are required for protected higher-strength countersunk assemblies.

Application Material / Grade / Finish
Higher-strength Grade 10.9 Used where drawings require more strength than standard Grade 8.8 flat head screws.
Countersink fit control Head angle, seat depth, and socket access should be verified against the machined countersink.
Black finish type by RFQ Confirm black oxide, blackened, oiled, or buyer-specific finish wording.
Protected machinery use Best for indoor machinery, tooling, and fixtures unless another coating is specified.
Anti-rust packing options Oiling, wrapping, and carton labels can be arranged for storage-sensitive shipments.

Applications & Limitations

Recommended for protected countersunk machinery assemblies where Grade 10.9 strength and black finish are both specified.

Tooling and clamping fixtures

Used where flush countersunk screws require higher-strength Grade 10.9 hardware.

Machined equipment plates

Suitable for countersunk plates and covers when head angle and seat depth match.

Black socket screw assortments

Supports importers stocking black high-strength flat head screws by M size.

MRO replacement orders

Useful when existing black 10.9 flat head screws are specified by drawing.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

Can this replace zinc plated 8.8 flat head screws?

Only if the drawing accepts Grade 10.9, black finish, and the same countersink geometry.

Is black finish corrosion resistant?

Not by default. Confirm oiling, black oxide, storage packing, or another protective coating during RFQ.

Why is countersink geometry important?

Flat head screws must seat correctly; wrong angle or depth can create poor fit or joint loading issues.

What applications usually choose 10.9?

Tooling, machinery plates, clamping fixtures, and higher-strength protected assemblies.

Can inspection documents be prepared?

They can be reviewed for the actual batch when requested before order confirmation.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders