Socket Head Cap Screw Hot Dip Galvanized 10.9 Supplier
Socket Head Cap Screw Hot Dip Galvanized 10.9. China supplier for M3-M24, length 6-150 mm; packing and documents by RFQ.
Product Overview & Available Options
Taiken supplies Socket Head Cap Screw Hot Dip Galvanized 10.9 as a China supplier and sourcing partner for B2B fastener orders where DIN 912 / ISO 4762 / project specification, Carbon steel, Hot Dip Galvanized, M3-M24, length 6-150 mm, packing, and document requirements should be confirmed by RFQ.
Taiken supplies hot dip galvanized 10.9 socket head cap screws for project-specific assemblies where a socket drive fastener and outdoor coating are both requested. Because HDG can affect threads and socket-head details, the coating process should be confirmed against the drawing.
Diameter, length, DIN 912 / ISO 4762 geometry, Grade 10.9 requirement, galvanizing condition, washer use, packing, and documents should be confirmed by RFQ. For critical joints, use project-approved acceptance data rather than generic product-page assumptions.
As a China supplier for machinery and project fasteners, Taiken can support mixed lengths, washers, labels, cartons, and applicable batch documents.
Dimensions & Technical Data
Key dimensional and mechanical values for this product.
| Specification | Value |
|---|---|
| Standard | DIN 912 / ISO 4762 / project specification |
| Head Type | Socket Head |
| Material | Carbon steel |
| Packaging | Bulk carton, small box, private label available |
| Lead Time | Confirmed by order quantity |
| Custom Options | Size, finish, packaging, and label confirmed by RFQ |
| Use Environment | Use only where HDG coating on Grade 10.9 socket screws is approved by the buyer's requirement |
| Specification | Value |
|---|---|
| Size Range | M3-M24, length 6-150 mm |
| Drive Type | Hex socket |
| Finish | Hot Dip Galvanized |
| MOQ | Confirmed by size and order quantity |
| Certification / Documents | ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement |
| Target Applications | Outdoor machinery assemblies, project replacement fasteners, distributor special orders, washer-supported fastening |
| Buyer Note | Confirm DIN/ISO geometry, Grade 10.9, HDG suitability, socket fit, washers, packing, and documents by RFQ |
Materials, Grades & Surface Finishes
Use this item when Grade 10.9 socket head cap screws with HDG finish are explicitly accepted by the buyer.
| Application | Material / Grade / Finish |
|---|---|
| Socket head DIN/ISO format | Geometry should be checked against DIN 912 / ISO 4762 or the buyer's drawing. |
| Grade 10.9 control | Strength class should match the application and mating components. |
| HDG suitability review | Hot dip galvanizing may affect threads and fit, so project approval matters. |
| Tool access confirmation | Socket drive access and head clearance should be reviewed before order release. |
| Documents by order | Inspection and material documents can be reviewed by batch and market requirement. |
Applications & Limitations
Recommended for confirmed projects where socket drive, Grade 10.9, HDG finish, and acceptance criteria are specified.
Outdoor machinery assemblies
Used only where HDG socket screws are accepted by the drawing.
Project replacement fasteners
Suitable when existing screw grade, coating, and dimensions are known.
Distributor special orders
Supports importers handling non-standard coating requests.
Washer-supported fastening
Can be supplied with washers where the assembly requires them.
Quality, Documents, Packaging & Delivery
Our quality coordination covers sourcing, inspection, packaging and documentation.
Inspection & Testing
- Dimensional verification (thread gauge, caliper, micrometer)
- Hardness testing (Rockwell / Brinell)
- Tensile and proof load testing
- Coating thickness measurement
- Visual and surface defect inspection
- Third-party inspection arranged on request
Available Documents
- Mill Test Certificate (EN 10204 3.1)
- Certificate of Conformance
- Inspection Report with photos
- Material Test Report
- Coating / Plating Certificate
- Packing List and commercial documents
Packaging Options
- Bulk carton (25 kg standard)
- Small box (per specification count)
- Plastic bag + carton
- Pallet with stretch wrap or fumigation
- Private label: custom box, label, barcode
- Moisture-resistant packaging on request
MOQ & Delivery
- MOQ confirmed by specification, grade and packaging
- Lead time typically 15–35 days depending on order
- Mixed container with other fastener products
- FOB / CIF / CFR terms available
- Partial shipment and split delivery on request
- Pre-shipment inspection before loading
Frequently Asked Questions
Can all socket cap screws be hot dip galvanized?
No. HDG suitability depends on dimensions, thread fit, coating process, and project acceptance.
Is this the same as black socket cap screws?
No. HDG changes coating, appearance, and thread condition compared with black finish.
What should be confirmed before RFQ?
Diameter, length, grade, standard, HDG requirement, washer need, quantity, and documents.
Are test reports included?
Only when applicable and requested during RFQ for the actual batch.
Can mixed lengths be supplied?
Yes, if each length and quantity is confirmed with packing requirements.
Let's Discuss Your Fastener Requirements
Send us your specifications, BOM or drawing. We typically respond within 24 business hours.
