Bugle Head Fine Thread Sharp Point Black Phosphate Drywall Screw Supplier
Bugle Head Fine Thread Sharp Point Black Phosphate Drywall Screw. China supplier for #6, #8, #10 (3.5-4.8 mm), length 25-75 mm; packing and documents by RFQ.
Product Overview & Available Options
Taiken supplies bugle head fine thread sharp point black phosphate drywall screws for dry interior drywall fastening where gypsum board is fixed to suitable light-gauge metal studs. Fine thread helps engagement in metal framing, while the bugle head is designed to seat into the board surface without tearing the paper when installed correctly.
Screw diameter, length, drive, thread, point, black phosphate finish, packing, and substrate thickness should be confirmed before quotation. This product should not be promoted for wet areas, exterior sheathing, treated timber, or heavy steel framing without a different coating or screw type review.
As a China supplier for drywall fastener distributors, Taiken can support common # gauge sizes, carton labels, bulk packing, and applicable order documents for Southeast Asia, Middle East, and Central Asia import programs.
Dimensions & Technical Data
Key dimensional and mechanical values for this product.
| Specification | Value |
|---|---|
| Standard | ASTM C1002 |
| Head Type | Bugle Head |
| Thread Type | Fine Thread |
| Material | Carbon steel |
| Packaging | Bulk carton, small box, private label available |
| Lead Time | Confirmed by order quantity |
| Custom Options | Size, finish, packaging, and label confirmed by RFQ |
| Use Environment | Dry interior use; review coating or screw type for wet, exterior, timber, or heavier steel applications |
| Specification | Value |
|---|---|
| Size Range | #6, #8, #10 (3.5-4.8 mm), length 25-75 mm |
| Drive Type | Phillips cross recess |
| Point Type | Sharp Point |
| Finish | Black Phosphate |
| MOQ | Confirmed by size and order quantity |
| Certification / Documents | ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement |
| Target Applications | Gypsum board to light-gauge metal studs, interior partitions, drywall distributor ranges, contractor bulk packing |
| Buyer Note | Confirm # gauge or metric equivalent, length, drive, fine thread, stud thickness, packing, and documents by RFQ |
Materials, Grades & Surface Finishes
This carbon steel bugle head drywall screw is for dry interior gypsum board fastening to suitable light-gauge metal studs where fine thread is required.
| Application | Material / Grade / Finish |
|---|---|
| Fine thread for metal studs | Fine thread is commonly selected for drywall to light-gauge metal framing. |
| Bugle head board seating | Designed to seat into gypsum board without cutting through the paper when installed correctly. |
| Black phosphate indoor finish | Intended for dry interior use, not wet or exterior exposure. |
| Sharp point limit | Sharp point use depends on stud thickness; heavier steel may need a different point or screw type. |
| Drywall packing support | Can be packed in bulk or boxed quantities with market labels. |
Applications & Limitations
Recommended for dry interior drywall-to-metal-stud fastening where fine thread and black phosphate finish are specified.
Gypsum board to metal studs
Used for drywall installation on suitable light-gauge metal framing.
Interior partition projects
Suitable for dry indoor partitions after length and stud thickness are confirmed.
Distributor drywall screw ranges
Supports importers stocking common #6, #8, and #10 sizes.
Contractor bulk packing
Can be packed for site use or resale with carton labels and size marking.
Quality, Documents, Packaging & Delivery
Our quality coordination covers sourcing, inspection, packaging and documentation.
Inspection & Testing
- Dimensional verification (thread gauge, caliper, micrometer)
- Hardness testing (Rockwell / Brinell)
- Tensile and proof load testing
- Coating thickness measurement
- Visual and surface defect inspection
- Third-party inspection arranged on request
Available Documents
- Mill Test Certificate (EN 10204 3.1)
- Certificate of Conformance
- Inspection Report with photos
- Material Test Report
- Coating / Plating Certificate
- Packing List and commercial documents
Packaging Options
- Bulk carton (25 kg standard)
- Small box (per specification count)
- Plastic bag + carton
- Pallet with stretch wrap or fumigation
- Private label: custom box, label, barcode
- Moisture-resistant packaging on request
MOQ & Delivery
- MOQ confirmed by specification, grade and packaging
- Lead time typically 15–35 days depending on order
- Mixed container with other fastener products
- FOB / CIF / CFR terms available
- Partial shipment and split delivery on request
- Pre-shipment inspection before loading
Frequently Asked Questions
When should fine thread drywall screws be used?
Fine thread is commonly used for gypsum board fixed to suitable light-gauge metal studs.
Can this be used in timber studs?
Coarse thread is usually preferred for timber. Confirm substrate before ordering.
Is black phosphate suitable for wet areas?
No. It is mainly for dry interior drywall use. Wet or exterior areas need coating review.
What stud thickness can it drill?
Sharp point capacity depends on screw size and stud thickness. Provide substrate details for confirmation.
Can Taiken pack for contractors?
Yes, bulk cartons, inner boxes, and labels can be reviewed by quantity and market requirement.
What gauge and length range can be quoted?
Typical gauge options are #6, #8, and #10 (3.5-4.8 mm) with 25-75 mm lengths; exact sizes are confirmed by RFQ.
Let's Discuss Your Fastener Requirements
Send us your specifications, BOM or drawing. We typically respond within 24 business hours.
