ASTM C1002 / application-based specification

Wafer Head Self-Drilling Zinc Plated Screw Supplier

Wafer Head Self-Drilling Zinc Plated Screw. China supplier for #6, #8, #10 (3.5-4.8 mm), length 25-75 mm; packing and documents by RFQ.

Quick Specifications
Size Range
#6, #8, #10 (3.5-4.8 mm), length 25-75 mm
Head Type
Wafer Head
Drive Type
Phillips cross recess
Point Type
Self-Drilling
Material
Carbon steel
Finish
Zinc Plated

Product Overview & Available Options

Taiken supplies Wafer Head Self-Drilling Zinc Plated Screw for drywall and plasterboard installation where gypsum board is fastened to light-gauge metal framing and protected fixture applications. Wafer head is useful where low-profile head coverage is needed. The self-drilling point should be selected for the actual metal substrate.

The zinc plated finish should be matched to dry interior or protected use unless another coating is confirmed. Wet areas, exterior sheathing, heavy steel, or treated timber need a separate screw and coating review.

As a China supplier for drywall screw distributors, Taiken can support common # gauge sizes, metric equivalents, contractor cartons, labels, and applicable order documents.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard ASTM C1002 / application-based specification
Head Type Wafer Head
Point Type Self-Drilling
Finish Zinc Plated
MOQ Confirmed by size and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Drywall fastening to light-gauge metal framing and protected fixture applications, interior partition projects, distributor stock, contractor cartons
Buyer Note Confirm # gauge or metric equivalent, length, drive, thread, point, substrate thickness, finish, packing, and documents by RFQ
Specification Value
Size Range #6, #8, #10 (3.5-4.8 mm), length 25-75 mm
Drive Type Phillips cross recess
Material Carbon steel
Packaging Bulk carton, small box, private label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Indoor or protected service; review coating for exterior, wet, or coastal exposure

Materials, Grades & Surface Finishes

This carbon steel wafer head self-drilling screw is for drywall fastening to light-gauge metal framing and protected fixture applications, with thread, point, finish, and substrate thickness confirmed.

Application Material / Grade / Finish
Drywall application focus Intended for gypsum board fastening to light-gauge metal framing and protected fixture applications, not general structural fastening.
Thread selection Wafer head is useful where low-profile head coverage is needed.
Point selection The self-drilling point should be selected for the actual metal substrate.
Zinc plated finish boundary Zinc plated should be checked against indoor, protected, or project-specific exposure.
Contractor packing support Bulk cartons, inner boxes, labels, and mixed sizes can be reviewed by order.

Applications & Limitations

Recommended for drywall projects where substrate type, screw length, thread, point, finish, and packing are defined.

Drywall board installation

Used for gypsum board fixed to light-gauge metal framing and protected fixture applications after length and board thickness are confirmed.

Interior partition projects

Suitable for dry or protected interior work when the coating is accepted.

Distributor drywall screw stock

Supports importers stocking common #6, #8, and #10 sizes.

Contractor site cartons

Can be packed for jobsite use with clear size and finish labels.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

Which substrate is this screw for?

It should be selected for light-gauge metal framing and protected fixture applications; confirm if your project uses a different substrate.

Can it be used outdoors?

Not without coating review. Drywall screws are usually for dry interior or protected applications.

What size notation should be used?

Many drywall screw lists use # gauge and inch lengths, with metric equivalents added for importers.

Can Taiken supply mixed sizes?

Yes, mixed sizes can be reviewed with MOQ, labels, and carton requirements.

What should be included in the RFQ?

Send diameter, length, thread, point, finish, substrate, packing, and document requirements.

What size range should I put in the RFQ?

Typical sizes are #6, #8, and #10 (3.5-4.8 mm) and lengths of 25-75 mm; final sizes are confirmed by RFQ.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders