DIN 7991 / ISO 10642 / project specification

Flat Head Socket Cap Screw Zinc Plated 8.8 Supplier

Flat Head Socket Cap Screw Zinc Plated 8.8. China supplier for M3-M24, length 6-150 mm; packing and documents by RFQ.

Quick Specifications
Size Range
M3-M24, length 6-150 mm
Head Type
Flat Head
Drive Type
Hex socket
Material
Carbon steel
Finish
Zinc Plated

Product Overview & Available Options

Taiken supplies Flat Head Socket Cap Screw Zinc Plated 8.8 as a China supplier and sourcing partner for B2B fastener orders where DIN 7991 / ISO 10642 / project specification, Carbon steel, Zinc Plated, M3-M24, length 6-150 mm, packing, and document requirements should be confirmed by RFQ.

Taiken supplies zinc plated Grade 8.8 flat head socket cap screws for protected countersunk assemblies, covers, plates, furniture hardware, and general machinery fixtures. The flat head must sit in a prepared countersink, so head angle, seat depth, socket size, and material thickness should be checked before quotation.

This page should differ from black 10.9 flat head screws by focusing on Grade 8.8 general-use strength, zinc plated protected finish, and cost-sensitive indoor assemblies. It should not be positioned as a high-strength or outdoor corrosion solution unless the drawing approves it.

As a China supplier for machinery and hardware distributors, Taiken can coordinate zinc plated flat head socket screws with washers where applicable, size labels, small boxes, and batch documents by order requirement.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard DIN 7991 / ISO 10642 / project specification
Head Type Flat Head
Material Carbon steel
Packaging Bulk carton, small box, private label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Indoor or protected service; review another finish or material for outdoor, humid, or coastal exposure
Specification Value
Size Range M3-M24, length 6-150 mm
Drive Type Hex socket
Finish Zinc Plated
MOQ Confirmed by size and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Machinery covers, hardware fixtures, zinc socket screw distributor ranges, cost-sensitive replacements
Buyer Note Confirm DIN 7991 / ISO 10642, countersink angle, Grade 8.8, zinc finish, socket size, length, packing, and documents by RFQ

Materials, Grades & Surface Finishes

Use this item when Grade 8.8 zinc plated flat head socket screws are required for protected countersunk assemblies.

Application Material / Grade / Finish
Countersunk seat geometry Head angle and seat depth must match the prepared countersink to avoid proud or loose seating.
Grade 8.8 general-use class Best for standard protected assemblies where higher 10.9 strength is not specified.
Zinc plated protected finish Commonly used for indoor machinery, hardware, and sheltered equipment.
Socket drive access Drive size and tool clearance should be checked with the countersunk design.
Small-box packing support Can support distributor boxes, labels, and mixed lengths by confirmed order rules.

Applications & Limitations

Recommended for protected countersunk assemblies where Grade 8.8 and zinc plated finish are accepted.

Machinery covers and plates

Used where the screw head must sit flush in a countersunk hole.

Hardware and fixture assembly

Suitable for protected brackets, plates, furniture fittings, and light equipment.

Distributor zinc socket screw ranges

Supports importers stocking M sizes and lengths in small boxes.

Cost-sensitive replacement orders

Useful where Grade 8.8 zinc plated screws match the existing specification.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

What must be checked before using flat head socket screws?

Countersink angle, seat depth, socket size, diameter, length, grade, and material thickness should be confirmed.

Can this replace black 10.9 flat head screws?

Only if the drawing accepts the lower Grade 8.8 class and zinc plated finish.

Is zinc plating suitable outdoors?

Usually it is for protected service. Outdoor or coastal exposure needs coating or stainless review.

Why does head angle matter?

If the countersink angle does not match, the head may not sit flush or may load the joint incorrectly.

Can Taiken pack mixed lengths?

Yes, mixed lengths can be reviewed with labels, carton rules, MOQ, and quantity per size.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders