Hex Washer Head Self-Drilling Screw Yellow Zinc Supplier
Hex Washer Head Self-Drilling Screw Yellow Zinc. China supplier for ST3.5-ST6.3, length 13-150 mm; packing and documents by RFQ.
Product Overview & Available Options
Taiken supplies Hex Washer Head Self-Drilling Screw Yellow Zinc as a China supplier and sourcing partner for B2B fastener orders where Custom / application-based specification, Carbon steel, Yellow Zinc, ST3.5-ST6.3, length 13-150 mm, packing, and document requirements should be confirmed by RFQ.
Taiken supplies yellow zinc hex washer head self-drilling screws for protected metal fastening where hex drive installation and wider head bearing are preferred. The point type, washer requirement, and thread should be matched to the metal substrate and exposure condition.
Drive size, screw diameter, length, drill point, washer or sealing requirement, yellow zinc finish, packing, and documents should be confirmed before quotation. Yellow zinc should not be promoted as a universal exterior roofing or coastal solution without coating and sealing review.
As a China supplier and consolidated sourcing partner, Taiken can supply hex washer head self-drilling screws with mixed sizes, labels, cartons, and applicable order documents for regional importers.
Dimensions & Technical Data
Key dimensional and mechanical values for this product.
| Specification | Value |
|---|---|
| Standard | Custom / application-based specification |
| Head Type | Hex Washer Head |
| Point Type | Self-Drilling |
| Finish | Yellow Zinc |
| MOQ | Confirmed by size and order quantity |
| Certification / Documents | ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement |
| Target Applications | Metal sheet fastening, protected cladding, yellow zinc distributor ranges, replacement packs |
| Buyer Note | Confirm drive size, drill point, washer need, substrate thickness, finish, packing, and documents by RFQ |
| Specification | Value |
|---|---|
| Size Range | ST3.5-ST6.3, length 13-150 mm |
| Drive Type | Phillips cross recess |
| Material | Carbon steel |
| Packaging | Bulk carton, small box, private label available |
| Lead Time | Confirmed by order quantity |
| Custom Options | Size, finish, packaging, and label confirmed by RFQ |
| Use Environment | Indoor or protected service; review coating and washer for exterior, roofing, or coastal exposure |
Materials, Grades & Surface Finishes
<p>Use these carbon steel hex washer head self-drilling screws with yellow zinc finish when hex drive installation and a wider bearing face are specified for protected metal fastening.</p>
| Application | Material / Grade / Finish |
|---|---|
| Hex washer head drive | Supports hex drive installation and a wider bearing face. |
| Washer requirement by application | Sealing washers should be specified when weather sealing is required. |
| Self-drilling point matching | Drilling capacity depends on point type, diameter, and substrate thickness. |
| Yellow zinc protected finish | Selected for appearance and protected service, not severe corrosion exposure. |
| Distributor packing options | Boxed, bulk, labeled, or mixed-size packing can be reviewed by order. |
Applications & Limitations
Recommended for protected metal fastening where hex drive, washer need, finish color, and point type are confirmed.
Metal sheet fastening
Used where installers need hex drive torque on suitable sheet-metal assemblies.
Protected cladding and fixtures
Can be used in sheltered cladding or fixtures after washer and coating needs are checked.
Distributor yellow zinc ranges
Supports importers stocking yellow zinc screw lines for resale.
Maintenance replacement packs
Useful for replacing existing screws by head type, point, and finish.
Quality, Documents, Packaging & Delivery
Our quality coordination covers sourcing, inspection, packaging and documentation.
Inspection & Testing
- Dimensional verification (thread gauge, caliper, micrometer)
- Hardness testing (Rockwell / Brinell)
- Tensile and proof load testing
- Coating thickness measurement
- Visual and surface defect inspection
- Third-party inspection arranged on request
Available Documents
- Mill Test Certificate (EN 10204 3.1)
- Certificate of Conformance
- Inspection Report with photos
- Material Test Report
- Coating / Plating Certificate
- Packing List and commercial documents
Packaging Options
- Bulk carton (25 kg standard)
- Small box (per specification count)
- Plastic bag + carton
- Pallet with stretch wrap or fumigation
- Private label: custom box, label, barcode
- Moisture-resistant packaging on request
MOQ & Delivery
- MOQ confirmed by specification, grade and packaging
- Lead time typically 15–35 days depending on order
- Mixed container with other fastener products
- FOB / CIF / CFR terms available
- Partial shipment and split delivery on request
- Pre-shipment inspection before loading
Frequently Asked Questions
Does this product include a sealing washer?
Only if specified. Washer material and sealing requirement should be included in the RFQ.
Can it be used for roofing?
Roofing exposure needs coating and sealing review. Yellow zinc alone may not be enough.
How is drill point selected?
Point type depends on substrate material and thickness. Provide installation details for confirmation.
Can Taiken pack mixed lengths?
Yes, mixed lengths can be reviewed with MOQ, labels, and carton rules.
Which documents can be supplied?
Inspection or material documents can be reviewed where applicable to the actual order.
What diameter and length range is available?
Typical sizes from ST3.5 to ST6.3 with lengths from 13 mm to 150 mm can be reviewed and confirmed by RFQ.
Let's Discuss Your Fastener Requirements
Send us your specifications, BOM or drawing. We typically respond within 24 business hours.
