DIN 7984 / project specification

Low Head Socket Cap Screw Black 10.9 Supplier

Low Head Socket Cap Screw Black 10.9. China supplier for M3-M24, length 6-150 mm; packing and documents by RFQ.

Quick Specifications
Size Range
M3-M24, length 6-150 mm
Head Type
Low Head
Drive Type
Hex socket
Material
Carbon steel
Finish
Black

Product Overview & Available Options

Taiken supplies Low Head Socket Cap Screw Black 10.9 as a China supplier and sourcing partner for B2B fastener orders where DIN 7984 / project specification, Carbon steel, Black, M3-M24, length 6-150 mm, packing, and document requirements should be confirmed by RFQ.

Taiken supplies black 10.9 low head socket cap screws for machinery assemblies where head clearance is limited and a standard socket cap screw head may be too tall. Low head screws should be selected from the drawing because reduced head height can change drive engagement and allowable load compared with standard head screws.

Thread size, length, low head geometry, Grade 10.9 requirement, socket drive, black finish type, packing, and documents should be confirmed before quotation. Do not substitute low head and standard DIN 912 socket cap screws without customer approval.

As a China supplier and sourcing partner, Taiken can support low head socket screw sizes, washers where required, carton labels, and order-based documents for machinery distributors and MRO buyers.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard DIN 7984 / project specification
Head Type Low Head
Material Carbon steel
Packaging Bulk carton, small box, private label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Indoor machinery service unless another coating and corrosion expectation are confirmed
Specification Value
Size Range M3-M24, length 6-150 mm
Drive Type Hex socket
Finish Black
MOQ Confirmed by size and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Limited-clearance equipment, machinery repair, fixtures, low head distributor ranges
Buyer Note Confirm low head standard or drawing, Grade 10.9, head height, socket size, black finish type, and packing by RFQ

Materials, Grades & Surface Finishes

Use this item when a low head socket screw is specified and the assembly allows the reduced head geometry.

Application Material / Grade / Finish
Low head clearance design Used where the screw head must sit lower than a standard socket cap screw.
Grade 10.9 confirmation Strength class should be checked against the drawing and load requirement.
Not a DIN 912 substitute Low head geometry should not be substituted for standard socket cap screws without approval.
Black finish by RFQ Finish type and corrosion expectation should be specified clearly.
MRO and distributor packing Supports mixed sizes and labels for machinery replacement programs.

Applications & Limitations

Recommended for limited-clearance machinery assemblies where low head geometry and Grade 10.9 are specified.

Limited-clearance equipment

Used where standard socket head height would interfere with moving parts or covers.

Machinery repair programs

Suitable for replacement when the existing screw is confirmed as low head.

Fixture and tooling work

Can be used in tooling where head clearance is defined by the drawing.

Distributor low head ranges

Supports importers stocking special socket screw lines in common M sizes.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

Can low head replace standard socket cap screws?

Only if the drawing or end customer approves it. The head height and drive engagement differ.

Is the standard DIN 912?

Standard socket cap screws are commonly DIN 912 / ISO 4762. Low head types should be confirmed by low head standard or drawing.

Is black finish suitable outdoors?

Usually no unless another coating or protection is specified. Confirm the finish requirement during RFQ.

What details are needed?

Provide diameter, length, head height, socket size, grade, finish, quantity, and packing requirement.

Can documents be supplied?

Inspection or material documents can be reviewed for the actual batch when requested before order confirmation.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders