Custom / application-based specification

Grade 10.9 Hot Dip Galvanized T-Bolts Supplier

Grade 10.9 Hot Dip Galvanized T-Bolts. China supplier for M6-M20, length 20-150 mm; packing and documents by RFQ.

Quick Specifications
Standard
Custom / application-based specification
Size Range
M6-M20, length 20-150 mm
Grade
10.9
Material
Carbon steel
Finish
Hot Dip Galvanized
Thread Type
Full Thread

Product Overview & Available Options

Taiken supplies Grade 10.9 Hot Dip Galvanized T-Bolts — a full thread bolt in carbon steel with a hot-dip galvanized finish — for channel, rail, and fixture assemblies where a T-head must fit a defined slot profile. HDG is commonly selected for outdoor or exposed service, while Grade 10.9 should be matched to the buyer’s drawing and joint requirement.

Bolt grades are metric property classes to ISO 898-1 — in bolt strength grades, 10.9 means 1,000 MPa tensile strength and 900 MPa yield strength, a step above grade 8.8. Unlike expansion bolts for steel, which anchor into concrete or masonry, this T-bolt fastens steel to steel — a channel, rail or fixture — with a nut on the threaded shank; a full thread anchor bolt is a different item, not a profile-fit T-bolt. A bolt head types chart helps compare T-heads with hex and pan heads — this page is the T-head variant for channel slots, so confirm the slot profile and head dimensions before ordering.

Head geometry, shank diameter, thread length, total length, slot size, nut grade, washer requirement, coating condition, and documents should be confirmed before quotation. For load-bearing installations, use project-approved data rather than generic product-family values.

As a China supplier for importers and project suppliers, Taiken can coordinate 10.9 HDG T-bolts with matching nuts, washers, packing labels, and applicable documents for Southeast Asia, Middle East, and Central Asia markets.

For corrosive service, choose stainless steel bolts: the A2-70 stainless steel T-bolt is the matching product, its stainless steel bolt grade is A2-70, and the full range of stainless steel bolt grades is listed on that page.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard Custom / application-based specification
Thread Type Full Thread
Material Carbon steel
Packaging Bulk carton, pallet, custom label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Outdoor or exposed service where Grade 10.9 and HDG are accepted by the project requirement
Dimensions Each size is supplied as a full thread bolt; the full thread bolt standard for this range follows the application specification — confirm thread pitch, length and T-head width by RFQ.
Specification Value
Size Range M6-M20, length 20-150 mm
Grade 10.9
Finish Hot Dip Galvanized
MOQ Confirmed by size, grade, and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Outdoor channel framing, equipment fixtures, project hardware packages, drawing-based stock
Buyer Note Provide slot profile, head dimensions, Grade 10.9 requirement, HDG condition, accessories, and documents by RFQ

Materials, Grades & Surface Finishes

Use this item when Grade 10.9, HDG finish, and the exact channel or slot geometry are confirmed. Available sizes are M6–M20, length 20–150 mm — confirm the exact diameter, length and T-head width by RFQ with the channel profile or drawing.

Application Material / Grade / Finish
Grade 10.9 metric class Used where the drawing requires a stronger carbon steel T-bolt than general Grade 8.8 hardware.
Profile-fit T-head Head dimensions must match the mating channel or rail slot.
HDG outdoor finish Often chosen for exposed service when zinc plating is not enough.
Accessory matching Nuts and washers can be checked with the bolt grade and finish.
Packing and label control Supports project packing or distributor cartons by confirmed order rules.
Threaded bolt with no head Not this product — a threaded bolt with no head is a stud bolt; this page is a T-bolt with a T-head for channel slots. See the matching stud bolt range by RFQ.
24mm bolt head Head width is confirmed from the channel or rail slot profile — a 24mm bolt head can be quoted where the slot accepts that head width; confirm head width, head thickness and slot size by RFQ.

Applications & Limitations

Recommended for outdoor channel assemblies where 10.9 strength and T-head slot fit are both required. Wholesale Grade 10.9 Hot Dip Galvanized T-Bolts — mixed sizes M6–M20 and distributor programs quoted by RFQ.

Outdoor channel framing

Used where the T-head locks into a rail or channel and HDG protection is specified.

Equipment fixture mounting

Suitable after load, slot profile, length, and nut grade are confirmed.

Project hardware packages

Can be supplied with nuts and washers from the buyer's schedule.

Distributor drawing-based stock

Supports importers that carry common T-bolt sizes for local project supply.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

What makes a T-bolt quotation accurate?

The slot profile, head width, head thickness, length, thread length, grade, and finish must be confirmed.

Is Grade 10.9 suitable for every outdoor channel?

No. The drawing and load requirement should confirm the correct grade and coating.

Does HDG affect assembly fit?

Yes. Galvanizing can affect thread and contact surfaces, so nut fit should be checked.

Can Taiken supply matching hardware?

Yes, nuts and washers can be included when standards, grades, finishes, and packing are provided.

Can private labels be used?

Carton labels and packing marks can be reviewed once sizes, quantities, and market requirements are confirmed.

10.9 bolt vs grade 8 — what changes for a T-bolt order?

Grade 10.9 (1,000 MPa tensile, 900 MPa yield to ISO 898-1) is stronger than grade 8.8 (800 MPa tensile, 640 MPa yield). For a T-bolt the higher class also raises the load the T-head and channel must carry — confirm the channel rating and the required class on the drawing before ordering.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders