Custom / application-based specification

Solar Mounting T-Bolt Stainless Steel A2 Supplier

Solar Mounting T-Bolt Stainless Steel A2. China supplier for M6-M20, length 20-150 mm; packing and documents by RFQ.

Quick Specifications
Standard
Custom / application-based specification
Size Range
M6-M20, length 20-150 mm
Grade
A2
Material
Stainless steel
Finish
Plain
Thread Type
Full Thread

Product Overview & Available Options

Taiken supplies Solar Mounting T-Bolt Stainless Steel A2, with a full thread. The T-head slides into the solar rail’s T-slot and clamps the panel clamp or rail connector when the nut is tightened. All sizes are metric stainless steel bolts, supplied with matching stainless steel bolts and nuts consolidated in one shipment by RFQ.

A2 is the 304 grade — these 304 stainless steel bolts suit rooftop and ground-mount solar in most climates. Unlike stainless steel curved head bolts, whose domed heads suit visible trim, this T-bolt has a flat T-head for solar rails. It is not a stainless steel barrel bolt (a door bolt) and not a stainless steel anchor bolt — it slides into a rail slot rather than being cast into concrete.

Taiken supplies A2 stainless solar mounting T-bolts for PV rail and clamp systems where the head shape must match the aluminum rail profile. Solar T-bolts are profile-sensitive fasteners, so buyers should provide the rail drawing, slot dimensions, clamp type, and required thread length before quotation.

A2 stainless steel is common in many solar mounting components, but site exposure still matters. Coastal, high-humidity, or chloride-heavy PV projects may require A4 stainless steel or a project-specific material approval rather than a general A2 assumption.

As a China supplier for solar and fastener importers, Taiken can coordinate solar T-bolts with flange nuts, washers, clamps, packing labels, and order-based documents for Southeast Asia, Middle East, and Central Asia project channels.

The same A2 grade is also available as a stainless steel all thread stud bolt — see the A2-70 stainless steel stud bolt.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard Custom / application-based specification
Thread Type Full Thread
Material Stainless steel
Packaging Bulk carton, pallet, custom label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Protected or inland PV sites where A2 stainless is approved; review A4 for coastal or chloride exposure
Specification Value
Size Range M6-M20, length 20-150 mm
Grade A2
Finish Plain
MOQ Confirmed by size, grade, and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications PV rail clamp assemblies, solar mounting kits, project spare parts, solar distributor programs
Buyer Note Provide rail drawing, slot size, clamp stack, thread length, accessory list, and market documents by RFQ

Materials, Grades & Surface Finishes

Use this item when the solar rail profile and clamp system are known and an A2 stainless T-bolt is acceptable for the project environment. The stainless steel bolt grade is A2, and the dimension table lists the thread pitch, length and T-head width for each size — the full thread bolt standard for this range. Each size is supplied as a full thread bolt, so the nut can sit anywhere along the shank.

Application Material / Grade / Finish
PV rail profile fit Head width, head thickness, and neck form should match the solar rail slot and clamp system.
A2 stainless material Commonly used in solar mounting hardware where the site environment is not chloride-heavy.
Clamp and nut compatibility Thread length and mating nut style should be checked against the clamp stack and rail design.
Project exposure review Coastal or high-humidity sites should confirm whether A4 stainless or another approved material is required.
Solar hardware packing T-bolts can be packed with nuts, washers, or clamp accessories according to the buyer's project list.
Stainless steel bolts strength A2 stainless steel (304 grade) for solar rails; confirm the property class and proof load for your rail system by RFQ.

Applications & Limitations

Recommended for PV mounting orders where the rail profile, clamp stack, and stainless grade are confirmed before quotation. Typical uses: solar panel mounting rails — rooftop and ground-mount systems — plus outdoor steel framing and equipment mounting. Stainless steel A2 resists rain and humidity for decades of outdoor service across Southeast Asia, the Middle East and Central Asia, where solar capacity is growing fast. For coastal solar sites, ask Taiken about the A4-80 T-bolt by RFQ: https://taikenfasteners.com/products/stainless-steel-t-bolt-a4-80/ Wholesale Solar Mounting T-Bolt Stainless Steel A2 is available in rail-compatible sizes, with distributor programs quoted by RFQ.

Solar rail clamp assemblies

Used where a T-bolt slides or locks into a PV rail and clamps a module or accessory in position.

PV project spare parts

Suitable for project suppliers that need rail-compatible replacement hardware with controlled packing.

Solar distributor kits

Can be supplied with nuts and washers for kit-style sales when component details are provided.

Protected or inland PV sites

A2 stainless can be reviewed for non-coastal sites after local corrosion conditions are confirmed.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

Why is the rail profile required?

Different PV rails use different slot shapes. The T-bolt head must fit the rail, so a drawing or sample avoids wrong selection.

Is A2 stainless enough for coastal solar projects?

Not always. Coastal or chloride exposure should be reviewed for A4 stainless steel or the project-specified material.

Can Taiken supply nuts and washers with the T-bolts?

Yes, nuts, washers, and related solar mounting hardware can be quoted when the kit list and packing rules are provided.

What thread length should be used?

Thread length depends on the clamp stack, rail design, washer use, and nut engagement requirement. It should be confirmed by drawing.

Can project documents be prepared?

Order documents, inspection records, or material certificates can be reviewed where applicable to the actual batch and destination market.

What size T-slot does this solar mounting T-bolt fit?

T-head width varies by bolt size — the dimension table lists the head width for each diameter. Match the head to your rail's T-slot and confirm the size by RFQ.

Can I order the T-bolts together with nuts, washers and clamps?

Yes — send your rail and clamp list by RFQ and Taiken will quote the T-bolts with matching flange nuts, washers and clamp accessories in one consolidated shipment.

Is this T-bolt compatible with aluminium solar rails?

Yes — stainless steel T-bolts with aluminium rails are the standard combination in solar mounting. Use an isolating washer where dissimilar-metal contact is a concern.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders