Custom / application-based specification

A4-80 Stainless Steel T-Bolts Fasteners Supplier

A4-80 Stainless Steel T-Bolts Fasteners. China supplier for M6-M20, length 20-150 mm; packing and documents by RFQ.

Quick Specifications
Standard
Custom / application-based specification
Size Range
M6-M20, length 20-150 mm
Grade
A4-80
Material
Stainless steel
Finish
Plain
Thread Type
Full Thread

Product Overview & Available Options

Taiken supplies A4-80 stainless steel T-bolts with a full thread. The T-head slides into a machine-table or fixture slot and clamps the workpiece when the nut is tightened. All sizes are metric stainless steel bolts, supplied with matching stainless steel bolts and nuts consolidated in one shipment by RFQ.

A4-80 is the 316-grade stainless steel (A4) — a step up from 304 stainless steel bolts (A2) for chloride, marine and chemical service. Unlike stainless steel curved head bolts, whose domed heads suit visible trim, this T-bolt has a flat T-head for slots. It is not a stainless steel barrel bolt (a door bolt) and not a stainless steel anchor bolt — it slides into a T-slot rather than being cast into concrete.

Taiken supplies A4-80 stainless steel T-bolts for channel, slot, rail, and fixture assemblies where the head geometry must match the mating slot profile and the environment requires better corrosion resistance than A2 stainless. A4-80 is often considered for coastal, humid, or chloride-exposed projects, subject to project approval.

Because T-bolts are frequently drawing-based, buyers should confirm head width, head thickness, neck shape, shank length, thread length, and accessory requirements before quotation. For load-critical installations, use project-approved load data rather than generic product-family assumptions.

As a China supplier serving importers and project suppliers, Taiken can coordinate A4-80 T-bolts with matching nuts, washers, packing, labels, and order documents where applicable for regional fastener programs.

The same A4-80 grade is also available as a stainless steel all thread stud bolt — see the A4-80 plain stud bolt.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard Custom / application-based specification
Thread Type Full Thread
Material Stainless steel
Packaging Bulk carton, pallet, custom label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Humid, coastal, or chloride-exposed service when approved by project requirement
Specification Value
Size Range M6-M20, length 20-150 mm
Grade A4-80
Finish Plain
MOQ Confirmed by size, grade, and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Coastal channel assemblies, outdoor fixtures, project supplier packages, special fastener stock
Buyer Note Confirm A4-80 requirement, channel fit, head dimensions, load basis, accessories, and documents by RFQ

Materials, Grades & Surface Finishes

Use this item when the project needs A4-80 stainless material and the buyer can confirm the channel or slot geometry. The stainless steel bolts strength for A4-80 is 800 MPa tensile strength and 600 MPa 0.2% proof stress to ISO 3506-1 — the highest standard class for austenitic stainless steel. The stainless steel bolt grade is A4-80, and the dimension table lists the thread pitch, length and T-head width for each size — the full thread bolt standard for this range. Each size is supplied as a full thread bolt, so the nut can sit anywhere along the shank.

Application Material / Grade / Finish
A4-80 corrosion resistance Often reviewed for coastal, humid, or chloride-exposed conditions where A2 stainless may not be enough.
Drawing-based head fit T-head geometry must be confirmed against the mating channel or slot before order release.
Higher stainless strength class A4-80 provides a different strength class from A2-70, but final suitability depends on the drawing and joint design.
Accessory package support Compatible nuts and washers can be sourced together when grades and dimensions are specified.
Project document review Material and inspection documents are confirmed by batch and destination-market requirement.

Applications & Limitations

Recommended for corrosion-conscious channel assemblies where A4-80 grade and slot compatibility are both required. Typical uses: marine and coastal equipment, chemical plants, water treatment, food processing and outdoor infrastructure — anywhere a T-bolt must resist corrosion. A4-80 suits chloride and coastal service across Southeast Asia, the Middle East and Central Asia. For continuous seawater immersion, confirm the grade with Taiken by RFQ. Wholesale A4-80 Stainless Steel T-Bolts are available in mixed sizes, with distributor programs quoted by RFQ.

Coastal channel assemblies

Used where stainless grade requirements are stricter and the T-head must lock into a defined channel profile.

Outdoor equipment fixtures

Suitable for fixture and rail mounting after load, slot geometry, and installation conditions are confirmed.

Project supplier packages

Supports buyers combining T-bolts, nuts, washers, and labels for project delivery.

Distributor special fastener ranges

Useful for stock programs that include corrosion-resistant drawing-based T-bolts.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

When is A4-80 preferred over A2-70?

A4-80 is usually reviewed for more corrosive environments such as coastal or chloride exposure, but the project requirement should confirm the grade.

Can head dimensions be changed?

Yes, custom or drawing-based head dimensions can be reviewed, but they must be confirmed before quotation and tooling or production decisions.

Are load ratings included automatically?

No. Load values depend on the bolt, slot profile, installation, and test basis. Provide project requirements for load-critical applications.

Can this be supplied as a kit?

It can be quoted with nuts, washers, and packing labels when each component's size and grade are confirmed.

What documents can support coastal projects?

Material certificates, inspection reports, or conformity documents can be reviewed where applicable to the actual order and market.

What does A4-80 mean?

A4 is the ISO grade for 316/316L stainless steel, and 80 is the property class (800 MPa tensile). So an A4-80 bolt is a 316-grade bolt at the 80 strength class.

Can A4-80 T-bolts be used with aluminium channels?

Yes — but use an isolating washer where stainless steel contacts aluminium to avoid galvanic corrosion, and confirm the channel material by RFQ.

Can A4-80 T-bolts be used in seawater?

A4-80 suits splash zones and coastal service. For continuous immersion, confirm the grade and coating with Taiken by RFQ.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders