Technical Knowledge Standards

DIN 933 vs ISO 4017: What Buyers Need to Know

Dimensional differences, equivalence and when the project specification should decide which standard you order.

2 min read

Key Takeaways

  • Both standards define fully threaded hexagon head bolts.
  • Most sizes are interchangeable; M10, M12, M14 and M22 differ in width across flats.
  • When a project names one standard, order that standard.

What each standard covers

DIN 933 is the German national standard for fully threaded hex bolts. ISO 4017 is the international standard that replaced it in most European specifications. Both describe the same product type: a hexagon head bolt threaded along the full shank.

DIN 933 was formally withdrawn in Germany, but it is still widely used in purchase orders, price lists and distributor catalogs.

Dimensional differences

The main difference is the width across flats (s) in four sizes. This affects which wrench fits the bolt head.

SizeDIN 933 s (mm)ISO 4017 s (mm)
M101716
M121918
M142221
M223234

When to specify which

Follow the project specification

If the drawing or specification names a standard, order that standard. Substitution needs written approval from the engineer.

For distribution stock

Check what your customers ask for. Many markets still order by DIN number even when ISO parts are acceptable.

Note: Mixing DIN and ISO bolts in one assembly can cause wrench mismatch on site. Keep one standard per project.

How to write it on your RFQ

State the standard, size, length, property class and finish in one line, for example: ISO 4017 M12×60, 8.8, zinc plated.

Related Articles

How to Choose a Hex Bolt: A Buyer’s Guide to Grades, Materials, Coatings and Standards
Technical Knowledge

How to Choose a Hex Bolt: A Buyer’s Guide to Grades, Materials, Coatings and Standards

November 18, 2026 · 14 min read
How to Tell a Real Grade 5 Bolt from a Fake: A Buyer’s Guide to SAE J429 Grade 5 and ASTM A449
Technical Knowledge

How to Tell a Real Grade 5 Bolt from a Fake: A Buyer’s Guide to SAE J429 Grade 5 and ASTM A449

November 16, 2026 · 14 min read
How to Vet a Fastener Supplier in China: A Factory Audit and Inspection Checklist for Importers
Technical Knowledge

How to Vet a Fastener Supplier in China: A Factory Audit and Inspection Checklist for Importers

November 14, 2026 · 12 min read

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Contact Us