Custom / application-based specification

Grade 12.9 Hot Dip Galvanized T-Bolts Supplier

Grade 12.9 Hot Dip Galvanized T-Bolts. China supplier for M6-M20, length 20-150 mm; packing and documents by RFQ.

Quick Specifications
Standard
Custom / application-based specification
Size Range
M6-M20, length 20-150 mm
Grade
12.9
Material
Carbon steel
Finish
Hot Dip Galvanized
Thread Type
Full Thread

Product Overview & Available Options

Taiken supplies Grade 12.9 Hot Dip Galvanized T-Bolts in carbon steel, with a full thread. The T-head slides into a machine-table or fixture slot and clamps the workpiece when the nut is tightened — a full thread bolt that adjusts to any position along the slot. Because class 12.9 is a high-strength category, the coating process and project acceptance requirement should be checked carefully.

Bolt grades are metric property classes — this T-bolt is grade 12.9, the highest standard strength class. The product gallery works as bolt head types with pictures, and the dimension table doubles as a bolt head types chart for the T-head profile. Unlike expansion bolts for steel, which anchor into concrete, this T-bolt is not a full thread anchor bolt — it slides into a T-slot and clamps from above.

Head width, head thickness, neck shape, thread length, total length, slot profile, nut grade, HDG thread fit, and inspection scope should be confirmed before quotation. Do not assume that HDG is accepted for every class 12.9 application without the buyer’s technical approval.

As a China supplier and sourcing coordinator, Taiken can support confirmed 12.9 HDG T-bolt orders with matching nuts, washers, labels, packing, and order-based documents for regional project buyers.

For corrosive service, choose stainless steel bolts: the A2-70 stainless steel T-bolt is the matching product, its stainless steel bolt grade is A2-70, and the full range of stainless steel bolt grades is listed on that page.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard Custom / application-based specification
Thread Type Full Thread
Material Carbon steel
Packaging Bulk carton, pallet, custom label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Use only where class 12.9 and HDG are accepted by project or engineering requirement
Specification Value
Size Range M6-M20, length 20-150 mm
Grade 12.9
Finish Hot Dip Galvanized
MOQ Confirmed by size, grade, and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Heavy channel fixtures, outdoor project assemblies, industrial replacement, special fastener supply
Buyer Note Confirm head fit, slot profile, Grade 12.9 requirement, HDG suitability, nut grade, and documents by RFQ

Materials, Grades & Surface Finishes

Use this item only when Grade 12.9, HDG coating, and T-head slot fit are all confirmed by the buyer's project requirement. Grade 12.9 is referenced as 1,220 MPa tensile strength and 1,100 MPa yield strength as a property-class reference — the strongest standard bolt grade in this range. The hot-dip galvanized coating gives a thick zinc layer for outdoor service; nuts are tapped oversize to fit the coating — confirm thread fit by RFQ. Unlike a threaded bolt with no head (a stud bolt), this T-bolt has a T-shaped head that bears on the slot. The dimension table lists the thread pitch, length and T-head width for each size — the full thread bolt standard for this range.

Application Material / Grade / Finish
High-strength 12.9 class Requires confirmation against the drawing and acceptance criteria.
T-head slot fit Head geometry must match the channel or slot profile, so drawing or sample data is important.
HDG suitability review Hot dip galvanizing on high-strength fasteners should be approved for the specific application.
Mating hardware control Nut grade, washer type, and thread fit after coating should be specified together.
Documents by project need Inspection and material documents can be reviewed by actual batch and market requirement.

Applications & Limitations

Recommended for confirmed high-strength T-bolt orders where slot fit, HDG process, and acceptance documents are defined. Typical uses: heavy structural steel connections, bridge and infrastructure fixtures, high-load machine tables and equipment mounting — anywhere a T-bolt must carry high clamp loads outdoors. The hot-dip galvanized coating suits outdoor and humid service across Southeast Asia, the Middle East and Central Asia where the project accepts HDG on class 12.9 fasteners. For continuous marine exposure, ask Taiken about stainless steel options by RFQ. Wholesale Grade 12.9 Hot Dip Galvanized T-Bolts are available in heavy-load sizes, with distributor programs quoted by RFQ.

Heavy channel fixtures

Used where a T-head locks into a channel and the project calls for class 12.9 strength.

Outdoor project assemblies

HDG can be considered only where the coating is accepted for high-strength use.

Industrial replacement orders

Suitable when existing T-bolt grade, head size, length, and finish are clearly known.

Special fastener distributor supply

Supports importers handling drawing-based high-strength T-bolts.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

Why does Grade 12.9 HDG need approval?

Class 12.9 is high strength, and HDG process acceptance depends on the application and project standard.

Can Taiken quote from a channel sample?

Yes, but a drawing with head and slot dimensions is preferred for reliable production and fit checks.

Are load values fixed for all T-bolts?

No. Load capacity depends on dimensions, material, channel profile, installation, and test basis.

Can nuts and washers be supplied?

Yes, matching hardware can be quoted when grade, finish, and packing rules are provided.

What should be included in the RFQ?

Provide grade, head dimensions, slot profile, length, thread length, coating requirement, quantity, and documents.

Do you have a 24 mm bolt head T-bolt?

T-head width varies by bolt size — the dimension table lists the head width for each diameter. If you need a 24 mm bolt head, send the bolt size by RFQ and we will confirm the matching T-head.

What is the difference between grade 12.9 and grade 8.8?

Both are metric property classes. Grade 12.9 is a high-strength steel referenced at 1,220 MPa tensile strength; grade 8.8 is carbon steel referenced at 800 MPa. Choose 12.9 where clamp load is highest; choose 8.8 where cost matters more than peak strength.

Does hot-dip galvanizing affect the thread fit?

The zinc coating adds thickness, so nuts are tapped oversize to fit. Confirm the thread fit for your size by RFQ before ordering.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders