ASTM A193 / A320 B7 Hot Dip Galvanized Stud Bolts Supplier
ASTM A193 / A320 B7 Hot Dip Galvanized Stud Bolts. China supplier for M6-M48, 1 m / 2 m / 3 m or cut-to-size; packing and documents by RFQ.
Product Overview & Available Options
Taiken supplies ASTM A193 / A320 B7 Hot Dip Galvanized Stud Bolts — alloy steel B7 stud bolts to ASTM A193 and ASTM A320 B7 wording — in sizes M6–M48, 1 m / 2 m / 3 m or cut-to-size. As a China supplier and sourcing partner for B2B fastener orders, Taiken confirms the ASTM A193 / A320 standard, alloy steel material, hot-dip galvanized finish, size, packing, and document requirements by RFQ.
Taiken supplies B7 hot dip galvanized stud bolts for industrial fastening orders where the buyer specifies ASTM-style stud-bolt requirements and outdoor corrosion protection is needed. HDG is often selected for exposed steelwork, pipe supports, and flange-related assemblies, but thread fit with nuts should be confirmed after galvanizing. Buyers also list this item as A193 B7 studs or ASTM A193 Grade B7 stud bolts on project schedules; both refer to the B7 grade under the ASTM wording above.
B7, A193, A320, length, thread form, nut grade, washer requirement, coating thickness, and inspection document scope should be clarified before quotation. If the drawing references a temperature, pressure, or code-controlled application, the exact standard and acceptance documents must come from the buyer’s project requirement.
As a China supplier and sourcing coordinator, Taiken can combine HDG B7 stud bolts with matching nuts, washers, cut lengths, packing labels, and order documents for Southeast Asia, Middle East, and Central Asia buyers.
Dimensions & Technical Data
Key dimensional and mechanical values for this product.
| Specification | Value |
|---|---|
| Standard | ASTM A193 / A320 |
| Length Range | 1 m / 2 m / 3 m or cut-to-size |
| Material | Alloy steel |
| Cutting Service | Cut-to-size available by request |
| MOQ | Confirmed by diameter, length, and order quantity |
| Certification / Documents | ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement |
| Target Applications | Pipe flanges, industrial maintenance, outdoor steel structures, distributor cut-length programs |
| Buyer Note | Confirm exact ASTM grade, length, thread fit after galvanizing, nut grade, coating requirement, and documents by RFQ |
| Specification | Value |
|---|---|
| Diameter Range | M6-M48 |
| Grade | B7 |
| Finish | Hot Dip Galvanized |
| Packaging | Bulk bundle, pallet, custom label available |
| Lead Time | Confirmed by order quantity |
| Custom Options | Size, finish, packaging, and label confirmed by RFQ |
| Use Environment | Outdoor or exposed industrial service when HDG and B7 grade are approved by the project requirement |
Materials, Grades & Surface Finishes
Use this item when B7-grade stud bolts with hot dip galvanizing are requested and nut fit plus document scope can be confirmed by order. Available sizes are M6–M48, 1 m / 2 m / 3 m or cut-to-size — confirm the exact diameter, length and thread form by RFQ.
| Application | Material / Grade / Finish |
|---|---|
| B7 stud-bolt grade reference | Suited to orders that specifically request B7-grade stud bolts under ASTM-style project requirements. |
| Hot dip galvanized protection | Commonly chosen for outdoor or exposed industrial service, subject to coating and fit confirmation. |
| Nut fit after galvanizing | Matching nuts and thread allowance should be checked because HDG changes thread surface conditions. |
| Cut-to-size sourcing | Stud lengths and thread length requirements can be coordinated from the buyer's size list. |
| Document-controlled supply | Inspection reports and material documents are confirmed by product, batch, and order requirement. |
| A193 steel grade wording | Orders referencing A193 steel should confirm the grade as B7, with the project standard and service condition stated on the drawing. |
Applications & Limitations
Recommended for industrial stud-bolt orders where B7 grade, HDG finish, nut matching, and documents are specified.
Pipe and flange assemblies
Used where project lists request B7 stud bolts with matching nuts and defined inspection documents.
Outdoor steel structures
HDG can be considered for exposed structures after thread fit, coating requirement, and mating hardware are confirmed.
Industrial maintenance supply
Supports MRO buyers replacing existing B7 galvanized studs with specified lengths and nut sets.
Distributor cut-length programs
Suitable for importers that need several diameters and lengths packed for resale or project supply. Wholesale ASTM A193 A320 B7 Hot Dip Galvanized Stud Bolts — mixed-diameter orders and distributor programs quoted by RFQ.
Quality, Documents, Packaging & Delivery
Our quality coordination covers sourcing, inspection, packaging and documentation.
Inspection & Testing
- Dimensional verification (thread gauge, caliper, micrometer)
- Hardness testing (Rockwell / Brinell)
- Tensile and proof load testing
- Coating thickness measurement
- Visual and surface defect inspection
- Third-party inspection arranged on request
Available Documents
- Mill Test Certificate (EN 10204 3.1)
- Certificate of Conformance
- Inspection Report with photos
- Material Test Report
- Coating / Plating Certificate
- Packing List and commercial documents
Packaging Options
- Bulk carton (25 kg standard)
- Small box (per specification count)
- Plastic bag + carton
- Pallet with stretch wrap or fumigation
- Private label: custom box, label, barcode
- Moisture-resistant packaging on request
MOQ & Delivery
- MOQ confirmed by specification, grade and packaging
- Lead time typically 15–35 days depending on order
- Mixed container with other fastener products
- FOB / CIF / CFR terms available
- Partial shipment and split delivery on request
- Pre-shipment inspection before loading
Frequently Asked Questions
Do HDG stud bolts need special nut fit checks?
Yes. Hot dip galvanizing affects thread surfaces, so nut fit and any oversize or tapping requirement should be confirmed.
Is B7 suitable for every flange application?
No. The project standard, service condition, temperature, and pressure requirement must confirm the correct stud-bolt grade.
Can nuts be supplied with the studs?
Yes, matching nuts and washers can be quoted when grade, standard, finish, and quantity are provided.
What documents should be requested?
Ask during RFQ for material certificates, inspection reports, or conformity documents required by the project or destination market.
Can Taiken supply cut lengths?
Yes, cut-to-size lengths can be reviewed when diameter, total length, thread form, and quantity per size are provided.
ASTM A193 vs A320 — which wording should the order use for B7 stud bolts?
Confirm the project wording before quotation. B7 is ordered under ASTM A193 for high-temperature and pressure service; A320 covers low-temperature service with grades such as L7. Where the drawing only says A193/A320, the exact grade, B7 basis, and documents are confirmed by RFQ.
Let's Discuss Your Fastener Requirements
Send us your specifications, BOM or drawing. We typically respond within 24 business hours.
