Grade 8.8 Zinc Plated Stud Bolts Supplier
Grade 8.8 Zinc Plated Stud Bolts. China supplier for M6-M48, 1 m / 2 m / 3 m or cut-to-size; packing and documents by RFQ.
Product Overview & Available Options
Taiken supplies Grade 8.8 Zinc Plated Stud Bolts — double ended stud bolts in sizes M6–M48 and lengths of 1 m / 2 m / 3 m or cut to size. Threaded on both ends, each stud bolt fastens flanged joints and steel assemblies with a nut on each end — no head to seat and no hole to tap. Grade 8.8 is a metric property-class reference, so it should not be treated as an ASTM A193 or A320 grade without buyer confirmation.
Bolt grades are metric property classes: the first number gives tensile strength in hundreds of MPa, so grade 8.8 is referenced as 800 MPa tensile strength and 640 MPa yield strength. Use the specification table as a bolt grade chart when comparing this grade with other grades. Unlike expansion bolts for steel, which anchor into concrete or masonry, this double-end stud bolt fastens steel to steel — flange faces, base plates and structural joints — with nuts on both ends.
Diameter, length, thread form, zinc finish, nut grade, washer requirement, packing, and document scope should be confirmed before quotation. Zinc plated carbon steel is mainly for indoor or protected service.
As a China supplier for importers and MRO buyers, Taiken can coordinate cut-to-size studs, matching nuts, washers, labels, and applicable documents for regional supply programs.
For corrosive service, choose stainless steel bolts: the A2-70 stainless steel stud bolt is the matching product, its stainless steel bolt grade is A2-70, and the full range of stainless steel bolt grades is listed on that page. For high-temperature flange service, see the B7 stud bolts.
Dimensions & Technical Data
Key dimensional and mechanical values for this product.
| Specification | Value |
|---|---|
| Standard | Project-specific metric property class |
| Length Range | 1 m / 2 m / 3 m or cut-to-size |
| Material | Carbon steel |
| Cutting Service | Cut-to-size available by request |
| MOQ | Confirmed by diameter, length, and order quantity |
| Certification / Documents | ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement |
| Target Applications | Protected metric assemblies, MRO replacement schedules, distributor cut-length programs, matched stud-and-nut sets |
| Buyer Note | Confirm metric Grade 8.8 basis, diameter, cut length, thread form, zinc finish, nut set, packing, and documents by RFQ |
| Specification | Value |
|---|---|
| Diameter Range | M6-M48 |
| Grade | 8.8 |
| Finish | Zinc Plated |
| Packaging | Bulk bundle, pallet, custom label available |
| Lead Time | Confirmed by order quantity |
| Custom Options | Size, finish, packaging, and label confirmed by RFQ |
| Use Environment | Indoor or protected service; review HDG or stainless material for outdoor or coastal exposure |
Materials, Grades & Surface Finishes
Use this item when a metric Grade 8.8 stud bolt is requested and the buyer confirms cut length, finish, and nut compatibility.
| Application | Material / Grade / Finish |
|---|---|
| Metric Grade 8.8 basis | Confirms this as a metric property-class item rather than an ASTM stud-bolt grade. |
| Cut-length control | Diameter, total length, and thread form should be specified for each line item. |
| Zinc protected finish | Used for indoor or protected service where heavy corrosion exposure is not expected. |
| Nut and washer matching | Mating hardware should be selected with the stud grade and thread. |
| Documents by batch | Inspection or material documents are reviewed against actual order requirements. |
| Bolt grades and strength | Property class 8.8 — referenced as 800 MPa tensile / 640 MPa yield (ISO 898-1 property-class values) |
| Marine grade bolts | Not this product — zinc plated carbon steel is for dry or protected service; for marine or coastal use order the stainless steel A2-70 stud bolt: https://taikenfasteners.com/products/stud-bolt-stainless-steel-a2-70/ |
Applications & Limitations
Recommended for protected metric stud-bolt orders where Grade 8.8, length, finish, and nut set are clear. Typical uses: flanged pipe joints, pressure equipment, structural steel connections, base plates and machine assembly — anywhere a double-end stud bolt must hold two parts together with nuts on both ends. The zinc plated finish suits dry or protected indoor service. For outdoor, humid or coastal projects in Southeast Asia, the Middle East and Central Asia, confirm the coating with Taiken by RFQ or switch to the stainless steel A2-70 stud bolt. Wholesale Grade 8.8 Zinc Plated Stud Bolts are available in M6–M48, cut-to-size lengths, with distributor programs quoted by RFQ.
Protected equipment fastening
Used where metric studs are required for indoor or sheltered assemblies.
MRO replacement schedules
Suitable when existing stud size, grade, and finish are known.
Distributor cut-length programs
Supports importers carrying multiple diameters and lengths.
Matched stud-and-nut sets
Can be supplied with compatible nuts and washers by confirmed requirement.
Quality, Documents, Packaging & Delivery
Our quality coordination covers sourcing, inspection, packaging and documentation.
Inspection & Testing
- Dimensional verification (thread gauge, caliper, micrometer)
- Hardness testing (Rockwell / Brinell)
- Tensile and proof load testing
- Coating thickness measurement
- Visual and surface defect inspection
- Third-party inspection arranged on request
Available Documents
- Mill Test Certificate (EN 10204 3.1)
- Certificate of Conformance
- Inspection Report with photos
- Material Test Report
- Coating / Plating Certificate
- Packing List and commercial documents
Packaging Options
- Bulk carton (25 kg standard)
- Small box (per specification count)
- Plastic bag + carton
- Pallet with stretch wrap or fumigation
- Private label: custom box, label, barcode
- Moisture-resistant packaging on request
MOQ & Delivery
- MOQ confirmed by specification, grade and packaging
- Lead time typically 15–35 days depending on order
- Mixed container with other fastener products
- FOB / CIF / CFR terms available
- Partial shipment and split delivery on request
- Pre-shipment inspection before loading
Frequently Asked Questions
Is Grade 8.8 an ASTM stud-bolt grade?
No. It is a metric property-class reference. Confirm the standard system before quotation.
Can this be used outdoors?
Zinc plating is mainly for protected service. Outdoor exposure should be reviewed for HDG or stainless material.
Can Taiken cut custom lengths?
Yes, cut lengths can be reviewed when diameter, thread, and quantity are provided.
Can nuts be supplied?
Yes, matching nuts and washers can be quoted with grade and finish requirements.
Which documents are available?
Documents can be reviewed where applicable to the actual batch and destination market.
Is there a Grade 8.8 stainless steel bolt?
No. Grade 8.8 is a carbon steel property class — there is no grade 8.8 stainless steel bolt. The stainless equivalent on this site is the A2-70 stainless steel stud bolt: https://taikenfasteners.com/products/stud-bolt-stainless-steel-a2-70/
What is the difference between a stud bolt and an expansion bolt?
A stud bolt is threaded on both ends and fastens two parts with nuts; an expansion bolt anchors into concrete or masonry. If your job is steel-to-steel — flanges, base plates, structural joints — this double-end stud bolt is the right part.
What is the typical lead time?
Lead time is typically 15–35 days depending on order quantity — confirm by RFQ.
Let's Discuss Your Fastener Requirements
Send us your specifications, BOM or drawing. We typically respond within 24 business hours.
