Project-specific / metric stainless specification

ASTM A193 / A320 A2-70 Plain Stud Bolts Supplier

ASTM A193 / A320 A2-70 Plain Stud Bolts. China supplier for M6-M48, 1 m / 2 m / 3 m or cut-to-size; packing and documents by RFQ.

Quick Specifications
Standard
Project-specific / metric stainless specification
Diameter Range
M6-M48
Length Range
1 m / 2 m / 3 m or cut-to-size
Material
Stainless steel
Grade
A2-70
Finish
Plain

Product Overview & Available Options

Taiken supplies ASTM A193 / A320 A2-70 Plain Stud Bolts as a China supplier and sourcing partner for B2B fastener orders where Project-specific / metric stainless specification, Stainless steel, Plain, M6-M48, 1 m / 2 m / 3 m or cut-to-size, packing, and document requirements should be confirmed by RFQ.

Taiken supplies A2-70 stainless steel plain stud bolts for metric assemblies where cut lengths, stainless material, and nut matching are required. A2-70 is commonly selected for clean indoor, humid, and protected exterior conditions where plated carbon steel is not preferred.

The buyer should confirm thread diameter, total length, thread form, stainless grade, mating nut material, washer requirement, and document scope before quotation. A2 stainless should not be treated as a universal marine solution; coastal, chloride-heavy, or chemical exposure should be checked carefully.

As a China supplier for importers and project suppliers, Taiken can consolidate A2-70 stud bolts with matching nuts, washers, labels, packing, and applicable documents for Southeast Asia, Middle East, and Central Asia orders.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard Project-specific / metric stainless specification
Length Range 1 m / 2 m / 3 m or cut-to-size
Material Stainless steel
Cutting Service Cut-to-size available by request
MOQ Confirmed by diameter, length, and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Clean equipment, humid indoor assemblies, stainless distributor ranges, project replacement sets
Buyer Note Confirm A2-70 suitability, cut length, thread form, nut material, washers, and documents by RFQ
Specification Value
Diameter Range M6-M48
Grade A2-70
Finish Plain
Packaging Bulk bundle, pallet, custom label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Clean indoor, humid, or protected exterior service; review A4 for coastal, chloride, or chemical exposure

Materials, Grades & Surface Finishes

Use this item when A2-70 stainless stud bolts are required and the environment is suitable for A2 rather than A4 stainless.

Application Material / Grade / Finish
A2-70 stainless material Commonly used for clean, humid, or protected exterior service where carbon steel plating is not preferred.
Cut-length supply Diameter, total length, and thread form can be coordinated from the buyer's schedule.
Nut material matching Mating nuts and washers should be confirmed to avoid material and strength mismatch.
Environment boundary Coastal, chloride, or chemical exposure should be reviewed for A4 stainless or another approved grade.
Batch document review Material and inspection documents can be prepared where applicable to the actual order.

Applications & Limitations

Recommended for stainless stud-bolt orders where A2-70 is accepted and cut lengths are defined by the buyer.

Clean equipment fastening

Used in equipment, fixtures, and brackets where stainless appearance and moderate corrosion resistance are required.

Humid indoor assemblies

Suitable for non-chloride humid environments after grade and mating hardware are confirmed.

Distributor stainless rods and studs

Supports importers stocking several diameters and cut lengths with controlled labels.

Project replacement sets

Can be paired with matching stainless nuts and washers for confirmed replacement schedules.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

When should A2-70 be used instead of carbon steel?

Use A2-70 when the buyer needs stainless corrosion resistance and the environment is suitable for A2 stainless.

Is A2-70 suitable for coastal sites?

Not as a blanket choice. Coastal or chloride exposure should be reviewed for A4 stainless steel or another confirmed material.

Can Taiken cut custom lengths?

Yes, cut lengths can be reviewed when diameter, total length, thread form, and quantity per size are provided.

Should nuts be A2 stainless too?

Often yes, but the final nut material and grade should follow the drawing, environment, and strength requirement.

Can certificates be supplied?

Material or inspection documents can be reviewed for the actual batch when requested during RFQ.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders