ASTM A193 / A320

ASTM A193 / A320 B7 Black Stud Bolts Supplier

ASTM A193 / A320 B7 Black Stud Bolts. China supplier for M6-M48, 1 m / 2 m / 3 m or cut-to-size; packing and documents by RFQ.

Quick Specifications
Standard
ASTM A193 / A320
Diameter Range
M6-M48
Length Range
1 m / 2 m / 3 m or cut-to-size
Material
Alloy steel
Grade
B7
Finish
Black

Product Overview & Available Options

Taiken supplies ASTM A193 / A320 B7 Black Stud Bolts — alloy steel B7 stud bolts to ASTM A193 and ASTM A320 B7 wording — for industrial bolting packages, flange maintenance, and distributor replacement programs. The buyer should confirm whether A193 B7, A320 L7, or another project wording is required, because service temperature and standard references matter in industrial orders. On project schedules the item is also listed as A193 B7 studs or ASTM A193 Grade B7 bolts; these refer to the same B7 grade under the ASTM wording above.

This page is broader than the fully threaded black B7 cut-length item. It should capture project service, thread length, nut grade, washer requirement, black finish definition, storage protection, and document scope. Black finish should not be promoted as an outdoor corrosion coating.

As a China supplier and sourcing coordinator, Taiken can provide B7 black stud bolts with compatible heavy hex nuts, washers, packing tags, heat/batch identification where applicable, and order documents for regional project buyers.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard ASTM A193 / A320
Length Range 1 m / 2 m / 3 m or cut-to-size
Material Alloy steel
Cutting Service Cut-to-size available by request
MOQ Confirmed by diameter, length, and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Flange maintenance, industrial project packages, B7 distributor inventory, matched stud-nut-washer sets
Buyer Note Confirm A193/A320 wording, B7 basis, total length, thread form, black finish type, nut set, storage packing, and documents by RFQ
Specification Value
Diameter Range M6-M48
Grade B7
Finish Black
Packaging Bulk bundle, pallet, custom label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Protected industrial service or later surface treatment; review galvanized, HDG, or stainless for outdoor exposure

Materials, Grades & Surface Finishes

Use this item when B7 black stud bolts are required and the buyer confirms service standard, thread form, finish, and nut set. Available sizes are M6–M48, 1 m / 2 m / 3 m or cut-to-size — confirm the exact diameter, length and thread form by RFQ.

Application Material / Grade / Finish
A193 / A320 service check Confirms whether the order is A193 B7, A320-related, or another project requirement.
Black finish definition Finish should be stated as black, black oxide, oiled, or another buyer-specific treatment.
Stud assembly scope Threaded length, total length, nuts, and washers should be supplied from the project schedule.
Protected-use boundary Black finish is mainly for protected service or later treatment, not outdoor corrosion protection.
Industrial document support Material and inspection documents are reviewed by batch and order requirement.
A193 steel grade wording Orders referencing A193 steel should confirm the grade as B7, with the finish stated as black, black oxide, or oiled.

Applications & Limitations

Recommended for industrial B7 stud-bolt packages where the service standard, black finish, and matching hardware are specified.

Flange maintenance orders

Used when MRO teams request B7 black studs with known length and nut requirements.

Industrial project packages

Suitable when project schedules define standard, service, finish, and documents.

Distributor B7 inventory

Supports importers carrying B7 black stud bolts for local replacement demand.

Matched stud-nut-washer sets

Can be supplied with heavy hex nuts and washers where specified. Wholesale ASTM A193 A320 B7 Black Stud Bolts — project packages with matched nuts and washers quoted by RFQ.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

Should the order specify A193 or A320?

Yes. The buyer should confirm the actual service standard and project requirement before quotation.

Is black finish corrosion protection?

Treat it as protected-service or later-treatment finish unless another approved coating is specified.

How is this different from fully threaded black B7?

This page covers project stud-bolt packages; fully threaded cut-length stock focuses on continuous thread and inventory schedules.

Can nuts and washers be supplied?

Yes, matching hardware can be quoted when grades, finishes, and quantities are provided.

Which documents are useful?

Material certificates, inspection records, and heat/batch data can be reviewed where applicable to the order.

B7 black or B7 hot-dip galvanized — which finish should the order use?

Choose hot-dip galvanized for outdoor or exposed service where corrosion protection matters; choose black for protected indoor service or where the finish will be treated later. Both are the same B7 grade under ASTM A193/A320 — confirm the finish, nut set and documents by RFQ.

Can B7 black stud bolts be used outdoors?

Black finish is mainly for protected service or later treatment, not outdoor corrosion protection. For outdoor exposure, order the hot-dip galvanized B7 stud bolt or a stainless option by RFQ. Confirm the finish and documents by RFQ before ordering.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders