Project-specific metric property class

Grade 10.9 Hot Dip Galvanized Stud Bolts Supplier

Grade 10.9 Hot Dip Galvanized Stud Bolts. China supplier for M6-M48, 1 m / 2 m / 3 m or cut-to-size; packing and documents by RFQ.

Quick Specifications
Standard
Project-specific metric property class
Diameter Range
M6-M48
Length Range
1 m / 2 m / 3 m or cut-to-size
Material
Carbon steel
Grade
10.9
Finish
Hot Dip Galvanized

Product Overview & Available Options

Taiken supplies Grade 10.9 Hot Dip Galvanized Stud Bolts in carbon steel, in sizes M6–M48, 1 m / 2 m / 3 m or cut-to-size.

Bolt grades are metric property classes to ISO 898-1 — in bolt strength grades, 10.9 means 1,000 MPa tensile strength and 900 MPa yield strength, a step above grade 8.8. Unlike expansion bolts for steel, which anchor into concrete or masonry, this stud bolt fastens steel to steel — flange faces, base plates and structural joints — with nuts on both ends.

This page should not be read as an ASTM B7 substitute. Grade 10.9 is a metric strength class; the buyer should provide the drawing, service environment, length schedule, thread form, nut grade, washer requirement, and any acceptance criteria for galvanizing on higher-strength fasteners.

As a China supplier for project and MRO buyers, Taiken can coordinate cut-to-size HDG 10.9 studs with compatible galvanized nuts, washers, carton marks, bundle labels, and batch documents where applicable.

For corrosive service, choose stainless steel bolts: the A2-70 stainless steel stud bolt is the matching product, its stainless steel bolt grade is A2-70, and the full range of stainless steel bolt grades is listed on that page. For high-temperature flange service, see the B7 stud bolts.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard Project-specific metric property class
Length Range 1 m / 2 m / 3 m or cut-to-size
Material Carbon steel
Cutting Service Cut-to-size available by request
MOQ Confirmed by diameter, length, and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Outdoor metric steel assemblies, exposed equipment maintenance, galvanized stud-and-nut sets, project cut-length orders
Buyer Note Confirm metric Grade 10.9 basis, HDG acceptance, thread fit, matching nut grade, washers, cut length, and documents by RFQ
Specification Value
Diameter Range M6-M48
Grade 10.9
Finish Hot Dip Galvanized
Packaging Bulk bundle, pallet, custom label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Outdoor or exposed service only where HDG on Grade 10.9 metric studs is approved by the project requirement

Materials, Grades & Surface Finishes

Use this item when the project confirms Grade 10.9 stud bolts, HDG coating acceptance, and matching nut requirements. Available sizes are M6–M48, 1 m / 2 m / 3 m or cut-to-size — confirm the exact diameter, length and thread form by RFQ.

Application Material / Grade / Finish
Metric Grade 10.9 basis Confirms the item as a metric property-class stud, not an ASTM B7 stud bolt.
HDG thread fit control Galvanizing changes thread surfaces, so nut fit and allowance must be checked.
Outdoor coating use Used where HDG is approved for exposed steelwork or project maintenance.
Nut grade confirmed with coating Mating nuts should be specified with grade, finish, and thread condition.
Batch document review Inspection and coating documents are confirmed against actual batch and order scope.
Marine grade bolts Not this product — hot-dip galvanized carbon steel is for exposed service, not continuous marine exposure; for marine or coastal use order the stainless steel A2-70 stud bolt: https://taikenfasteners.com/products/stud-bolt-stainless-steel-a2-70/
Bolt grade chart Grade 10.9 — 1,000 MPa tensile strength and 900 MPa yield strength to ISO 898-1; use the specification table to compare grades.
Bolt grades explained Metric property classes such as 8.8, 10.9 and 12.9 state tensile and yield strength; confirm the required class on the drawing before ordering.

Applications & Limitations

Recommended for exposed metric stud-bolt packages where Grade 10.9, HDG process, and nut fit are explicitly approved.

Outdoor metric steel assemblies

Used when project drawings call for Grade 10.9 studs and galvanized protection.

Exposed equipment maintenance

Suitable for replacement schedules where length, thread, and HDG finish are known.

Galvanized stud-and-nut sets

Can be supplied with compatible nuts and washers after thread fit is reviewed.

Project cut-length orders

Supports buyers with diameter and length schedules for multiple line items. Wholesale Grade 10.9 Hot Dip Galvanized Stud Bolts — mixed sizes M6–M48 and distributor programs quoted by RFQ.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

Is Grade 10.9 the same as B7?

No. Grade 10.9 is a metric property class; B7 is an ASTM grade. The buyer must confirm the required system.

Why does HDG need thread-fit confirmation?

Hot dip galvanizing changes the thread surface, so matching nuts and any allowance requirements must be checked.

Can this be used outdoors?

Yes when the project accepts HDG on Grade 10.9 studs and confirms the coating and nut fit requirements.

What should the RFQ include?

Diameter, length, thread form, Grade 10.9 basis, HDG requirement, nut grade, washers, quantity, and documents.

Are coating certificates fixed for every order?

No. Coating and inspection documents must be requested and confirmed against the actual batch.

10.9 bolt vs grade 8 — which is stronger?

Grade 10.9 (1,000 MPa tensile, 900 MPa yield) is stronger than grade 8.8 (800 MPa tensile, 640 MPa yield) under ISO 898-1. Choose 10.9 where clamp load is higher; confirm the required class on the drawing before ordering.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders