ASTM A193 / A320 Grade 12.9 Hot Dip Galvanized Stud Bolts Supplier
ASTM A193 / A320 Grade 12.9 Hot Dip Galvanized Stud Bolts. China supplier for M6-M48, 1 m / 2 m / 3 m or cut-to-size; packing and documents by RFQ.
Product Overview & Available Options
Taiken supplies ASTM A193 / A320 Grade 12.9 Hot Dip Galvanized Stud Bolts — metric Grade 12.9 stud bolts in alloy steel with a hot-dip galvanized finish — in sizes M6–M48, 1 m / 2 m / 3 m or cut-to-size.
Taiken supplies Grade 12.9 hot dip galvanized stud bolts for project-specific high-strength fastening orders that require cut lengths and corrosion protection. Because Grade 12.9 is a metric property-class description, buyers should confirm whether the drawing requires metric class 12.9, an ASTM grade, or a project-specific equivalent before quotation. Bolt grades are metric property classes to ISO 898-1 — this stud bolt is Grade 12.9, the highest standard strength class. Buyers searching for A193 steel should note that this is a metric Grade 12.9 product, not an ASTM A193 grade — confirm the required system on the drawing before quotation.
For high-strength fasteners, coating choice and process control matter. HDG suitability, thread fit after galvanizing, nut grade, washer requirement, and any embrittlement-related acceptance criteria should be confirmed by the buyer’s technical documents instead of assumed from the product name.
As a China supplier and consolidated sourcing partner, Taiken can coordinate Grade 12.9 HDG stud bolts with matching nuts, washers, packing, labels, and applicable inspection documents for regional industrial buyers.
For ASTM-grade stud bolts, see the ASTM A193 Grade B7 studs and ASTM A193 Grade B7 bolts in black finish — both are the B7 grade under ASTM A193. For stainless steel bolts, the A2-70 stainless steel stud bolt is the matching product; its stainless steel bolt grade is A2-70, and the full range of stainless steel bolt grades is listed on that page.
Dimensions & Technical Data
Key dimensional and mechanical values for this product.
| Specification | Value |
|---|---|
| Standard | Project-specific metric property class |
| Length Range | 1 m / 2 m / 3 m or cut-to-size |
| Material | Alloy steel |
| Cutting Service | Cut-to-size available by request |
| MOQ | Confirmed by diameter, length, and order quantity |
| Certification / Documents | ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement |
| Target Applications | Confirmed high-strength metric stud-bolt orders, outdoor packages, MRO replacement, distributor cut-length supply |
| Buyer Note | Confirm metric class versus ASTM grade, HDG suitability, nut grade, thread fit, and acceptance documents by RFQ |
| Specification | Value |
|---|---|
| Diameter Range | M6-M48 |
| Grade | 12.9 |
| Finish | Hot Dip Galvanized |
| Packaging | Bulk bundle, pallet, custom label available |
| Lead Time | Confirmed by order quantity |
| Custom Options | Size, finish, packaging, and label confirmed by RFQ |
| Use Environment | Use only where Grade 12.9 and HDG are accepted by the project or engineering requirement |
Materials, Grades & Surface Finishes
Use this item only when the buyer confirms Grade 12.9 stud bolts, HDG suitability, and the required acceptance basis for the application. Available sizes are M6–M48, 1 m / 2 m / 3 m or cut-to-size — confirm the exact diameter, length and thread form by RFQ.
| Application | Material / Grade / Finish |
|---|---|
| Grade 12.9 requirement control | Treats 12.9 as a high-strength metric property class that must be confirmed against the drawing. |
| HDG process review | Hot dip galvanizing should be checked for high-strength applications, thread fit, and project acceptance rules. |
| Nut and washer matching | Mating nuts and washers should be selected against the same project requirement, not assumed generically. |
| Cut-length flexibility | Lengths can be reviewed from the buyer's diameter and cut-to-size schedule. |
| Technical documents by order | Test and inspection documents are offered where applicable to the actual batch and project requirement. |
| ASTM A320 Grade L7 bolts | Not this product — L7 is an ASTM A320 low-temperature grade; this page is a metric Grade 12.9 alloy steel stud bolt. Order L7-grade studs by RFQ with the project standard stated. |
| ASTM A193 Grade B8 / B8 Bolts | Not this product — B8 is a stainless steel grade under ASTM A193; this page is a metric Grade 12.9 alloy steel stud bolt. Stainless options are available by RFQ. |
| ASTM A320 PDF | Project standard documents in PDF format (mill test certificate, inspection report) are confirmed by RFQ — state the required document list with the order. |
Applications & Limitations
Recommended only for confirmed high-strength metric stud-bolt orders where coating and acceptance requirements are specified.
Project-specified high-strength joints
Used when the drawing clearly calls for class 12.9 stud bolts and confirms the coating approach.
Outdoor structural packages
HDG can be considered for exposed service only when the high-strength coating requirement is approved.
Maintenance replacement lists
Useful when MRO buyers provide the existing size, grade, finish, and nut specification for replacement.
Distributor cut-length orders
Can support mixed diameters and lengths when each combination is confirmed by the buyer. Wholesale ASTM A193 A320 Grade 12.9 Hot Dip Galvanized Stud Bolts — mixed sizes M6–M48 and distributor programs quoted by RFQ.
Quality, Documents, Packaging & Delivery
Our quality coordination covers sourcing, inspection, packaging and documentation.
Inspection & Testing
- Dimensional verification (thread gauge, caliper, micrometer)
- Hardness testing (Rockwell / Brinell)
- Tensile and proof load testing
- Coating thickness measurement
- Visual and surface defect inspection
- Third-party inspection arranged on request
Available Documents
- Mill Test Certificate (EN 10204 3.1)
- Certificate of Conformance
- Inspection Report with photos
- Material Test Report
- Coating / Plating Certificate
- Packing List and commercial documents
Packaging Options
- Bulk carton (25 kg standard)
- Small box (per specification count)
- Plastic bag + carton
- Pallet with stretch wrap or fumigation
- Private label: custom box, label, barcode
- Moisture-resistant packaging on request
MOQ & Delivery
- MOQ confirmed by specification, grade and packaging
- Lead time typically 15–35 days depending on order
- Mixed container with other fastener products
- FOB / CIF / CFR terms available
- Partial shipment and split delivery on request
- Pre-shipment inspection before loading
Frequently Asked Questions
Why does Grade 12.9 need extra confirmation?
Grade 12.9 is a high-strength metric class, and coating or application limits may apply. The drawing and acceptance basis should be checked.
Is ASTM A193 / A320 the same as metric 12.9?
No. ASTM grades and metric property classes are different systems. Confirm the exact standard or project requirement before quotation.
Can HDG be used on all 12.9 fasteners?
Do not assume that. The coating process and acceptance criteria should be approved for the specific high-strength application.
Can matching nuts be supplied?
Yes, but nut grade, thread fit, coating, and washer requirements must be specified together with the stud bolts.
What data should the RFQ include?
Provide diameter, length, thread form, grade basis, coating requirement, quantity, application notes, and documents required.
ASTM A193 vs A320 — which wording applies to a Grade 12.9 stud bolt?
Neither, directly. Grade 12.9 is a metric property class to ISO 898-1; ASTM A193 covers high-temperature service and A320 covers low-temperature service with grades such as L7. Confirm whether the drawing requires metric class 12.9, an ASTM grade, or a project-specific equivalent before quotation.
Let's Discuss Your Fastener Requirements
Send us your specifications, BOM or drawing. We typically respond within 24 business hours.
