Project-specific / metric stainless specification

ASTM A193 / A320 A4-80 Plain Stud Bolts Supplier

ASTM A193 / A320 A4-80 Plain Stud Bolts. China supplier for M6-M48, 1 m / 2 m / 3 m or cut-to-size; packing and documents by RFQ.

Quick Specifications
Standard
Project-specific / metric stainless specification
Diameter Range
M6-M48
Length Range
1 m / 2 m / 3 m or cut-to-size
Material
Stainless steel
Grade
A4-80
Finish
Plain

Product Overview & Available Options

Taiken supplies ASTM A193 / A320 A4-80 Plain Stud Bolts as a China supplier and sourcing partner for B2B fastener orders where Project-specific / metric stainless specification, Stainless steel, Plain, M6-M48, 1 m / 2 m / 3 m or cut-to-size, packing, and document requirements should be confirmed by RFQ.

Taiken supplies A4-80 stainless steel plain stud bolts for assemblies where stronger stainless fastening and higher corrosion resistance are required. A4-80 is often reviewed for coastal, humid, or chloride-exposed environments, but final use should still follow the project specification.

 

Metric stainless steel bolts are ordered by property class: A4-80 is the 316-family stainless steel at the 80 strength class (800 MPa tensile), a step above A2-70 where chloride or coastal exposure is expected. Buyers comparing 304 stainless steel bolts with A4-80 should note that 304 (A2) and 316 (A4) are different material families — confirm the grade on the drawing, not just the stainless label. A193 steel wording appears on project schedules for this range; where the order references A193 steel, confirm the grade as A4-80 and the project specification before quotation. Stainless steel bolts and nuts are quoted as matched sets — the A4-80 stud bolt with stainless steel studs and nuts in the same grade, so nut and washer materials do not mismatch the stud.

Buyers should confirm thread diameter, total length, thread form, A4-80 requirement, mating nut grade, washer requirement, packing, and certificates before quotation. Load-critical or code-controlled applications should rely on project-approved data and documents rather than generic website descriptions.

As a China supplier and sourcing coordinator, Taiken can supply A4-80 stud bolts with matching nuts, washers, cut-to-size schedules, carton labels, and applicable order documents for regional industrial buyers.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard Project-specific / metric stainless specification
Length Range 1 m / 2 m / 3 m or cut-to-size
Material Stainless steel
Cutting Service Cut-to-size available by request
MOQ Confirmed by diameter, length, and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Coastal assemblies, industrial equipment packages, replacement sets, A4 stainless distributor programs
Buyer Note Confirm cut length, thread form, A4-80 requirement, mating nuts, load basis, and document scope by RFQ
Specification Value
Diameter Range M6-M48
Grade A4-80
Finish Plain
Packaging Bulk bundle, pallet, custom label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Humid, coastal, or chloride-exposed service when A4-80 is approved by project requirement

Materials, Grades & Surface Finishes

Use this item when A4-80 stainless stud bolts are required for a more corrosive environment and all dimensions are confirmed. Available sizes are M6–M48, 1 m / 2 m / 3 m or cut-to-size — confirm the exact diameter, length and thread form by RFQ.

Application Material / Grade / Finish
A4-80 stainless grade Often selected where A2 stainless may not be enough for coastal, humid, or chloride-exposed service.
Cut-to-size control Diameter, total length, and thread form are coordinated from the buyer's schedule.
Matching hardware review Nuts and washers should be selected with the same environment and strength requirement in mind.
Application approval needed Safety-critical or code-controlled joints should follow project-approved values and acceptance criteria.
Market document support Material and inspection documents can be reviewed for the actual product, batch, and destination market.
Stainless Steel Barrel Bolt Not this product — a barrel bolt is a furniture or panel fastener; this page is a straight A4-80 stud bolt for nut-and-washer assemblies.
Stainless Steel Weld studs Not this product — weld studs are welded to a base plate; this stud bolt is threaded at both ends and fastened with nuts.
Stainless steel headed stud / anchor bolt Different item — where the drawing calls for a stainless steel headed stud or a stainless steel anchor bolt cast into concrete, confirm head form and embedment length by RFQ; this plain stud bolt is supplied straight and cut to length.

Applications & Limitations

Recommended for stainless stud-bolt orders where A4-80 corrosion resistance and strength class are both specified. Wholesale ASTM A193 A320 A4-80 Plain Stud Bolts — mixed diameters M6–M48 and distributor programs quoted by RFQ.

Coastal and humid assemblies

Used where the project calls for stronger stainless fastening and improved corrosion resistance.

Industrial equipment packages

Can be supplied for pumps, supports, and equipment where A4-80 is named in the size schedule.

Project replacement sets

Suitable for replacement orders when the existing grade, length, thread, and nut details are known.

Distributor stainless programs

Supports importers carrying A4 stainless studs with matching nuts and labels.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

When is A4-80 preferred over A2-70?

A4-80 is usually reviewed for stronger stainless fastening and more corrosive environments such as coastal or chloride exposure.

Can A4-80 be used for every structural joint?

No. Structural or safety-critical applications need project-approved load data, standards, and acceptance documents.

What details define a stud-bolt order?

Diameter, total length, thread form, thread direction if relevant, material grade, finish, nuts, washers, and documents.

Can matching A4 nuts be supplied?

Yes, matching nuts can be quoted when the nut standard, grade, finish, and packing requirements are provided.

Are certificates included automatically?

No. Certificates and inspection documents must be requested and confirmed against the actual batch and market requirement.

ASTM A193 vs A320 — which wording applies to an A4-80 stud bolt?

Neither, directly. A4-80 is a metric stainless property class (316 family, 800 MPa tensile); ASTM A193 covers high-temperature service and A320 covers low-temperature service with grades such as L7. Confirm whether the drawing requires A4-80, an ASTM grade, or a project-specific equivalent before quotation.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders