Custom / application-based specification

Grade 8.8 Black Carbon Steel T-Bolts Supplier

Grade 8.8 Black Carbon Steel T-Bolts. China supplier for M6-M20, length 20-150 mm; packing and documents by RFQ.

Quick Specifications
Standard
Custom / application-based specification
Size Range
M6-M20, length 20-150 mm
Grade
8.8
Material
Carbon steel
Finish
Black
Thread Type
Full Thread

Product Overview & Available Options

Taiken supplies grade 8.8 black carbon steel T-bolts with a full thread. The T-head slides into a machine-table or fixture slot and clamps the workpiece when the nut is tightened — a full thread bolt that adjusts to any position along the slot. T-bolts are profile-sensitive fasteners, so head width, head thickness, neck form, shank length, thread length, and slot fit should be confirmed from a drawing or sample.

Bolt grades are metric property classes — this T-bolt is grade 8.8. The product gallery works as bolt head types with pictures, and the dimension table doubles as a bolt head types chart for the T-head profile. Unlike expansion bolts for steel, which anchor into concrete, this T-bolt is not a full thread anchor bolt — it slides into a T-slot and clamps from above.

The Grade 8.8 requirement and black finish should be matched to the application. Indoor or protected service unless the buyer approves the black finish for the actual exposure For load-bearing or safety-critical use, project-approved load data should control the final selection.

As a China supplier and consolidated sourcing partner, Taiken can supply T-bolts with matching nuts, washers, labels, carton, and applicable documents for Southeast Asia, Middle East, and Central Asia buyers.

For corrosive service, choose stainless steel bolts: the A2-70 stainless steel T-bolt is the matching product, its stainless steel bolt grade is A2-70, and the full range of stainless steel bolt grades is listed on that page.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard Custom / application-based specification
Thread Type Full Thread
Material Carbon steel
Packaging Bulk carton, pallet, custom label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Indoor or protected service unless the buyer approves the black finish for the actual exposure
Specification Value
Size Range M6-M20, length 20-150 mm
Grade 8.8
Finish Black
MOQ Confirmed by size, grade, and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications protected channel assemblies, machinery fixtures, and distributor T-bolt stock
Buyer Note Provide drawing, sample, channel profile, head dimensions, thread length, accessory requirements, and documents by RFQ

Materials, Grades & Surface Finishes

Use this item when Grade 8.8, black finish, and exact T-head slot geometry are confirmed. Unlike a threaded bolt with no head (a stud bolt), this T-bolt has a T-shaped head that bears on the slot — order the double-end stud bolt (https://taikenfasteners.com/products/stud-bolt-zinc-plated-8-8/) if the joint needs a headless fastener. The dimension table lists the thread pitch, length and T-head width for each size — the full thread bolt standard for this range.

Application Material / Grade / Finish
Profile-fit T-head The head shape must match the channel or rail slot, so drawing data is important.
Grade 8.8 grade control Grade should be confirmed from the buyer's drawing or joint requirement.
Black finish boundary Finish selection should follow indoor, protected, outdoor, or project-specific exposure.
Thread length confirmation Threaded portion, shank length, and total length should be specified separately.
Accessory package support Nuts and washers can be quoted with the T-bolts when standards and grades are provided.

Applications & Limitations

Recommended for protected channel assemblies, machinery fixtures, and distributor T-bolt stock where channel fit, grade, finish, and accessory matching are clear. Typical uses: machine-tool tables, welding fixtures, jig and fixture clamping, equipment mounting and steel framing — anywhere a bolt must slide into a slot and clamp from above. The black finish suits dry indoor service. For outdoor or humid sites in Southeast Asia, the Middle East and Central Asia, ask Taiken about zinc plated or hot-dip galvanized T-bolts by RFQ. Wholesale Grade 8.8 Black Carbon Steel T-Bolts are available in mixed sizes, with distributor programs quoted by RFQ.

Channel and slot assemblies

Used where the T-head locks into a rail, profile, or slot.

Equipment fixture mounting

Suitable after slot geometry, load condition, and mating nut details are confirmed.

Distributor special fastener stock

Supports importers carrying drawing-based T-bolts in several lengths.

Mixed accessory shipments

Can be supplied with nuts and washers by confirmed size list.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

What dimensions are critical for T-bolts?

Head width, head thickness, neck shape, diameter, thread length, total length, and slot profile.

Can Taiken quote without a drawing?

A drawing, sample, or channel profile is strongly recommended. Without it, the quotation is preliminary.

Are load values fixed?

No. Load capacity depends on dimensions, material, channel design, installation, and test basis.

Can nuts and washers be included?

Yes, matching accessories can be quoted when grade, finish, and packing rules are provided.

What documents can be prepared?

Material, inspection, or conformity documents can be reviewed where applicable to the actual batch.

Do you have a 24 mm bolt head T-bolt?

T-head width varies by bolt size — the dimension table lists the head width for each diameter. If you need a 24 mm bolt head, send the bolt size by RFQ and we will confirm the matching T-head.

Is there a Grade 8.8 stainless steel T-bolt?

No — grade 8.8 is a carbon steel property class, so there is no grade 8.8 stainless steel bolt. The stainless equivalent is the A2-70 stainless steel T-bolt: https://taikenfasteners.com/products/stainless-steel-t-bolt-a2-70/

What does the black finish do?

The black finish is a light protective coating for dry indoor use — it is not a corrosion-proof coating. For outdoor or humid service, choose zinc plated or hot-dip galvanized T-bolts.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders