Custom / application-based specification

A2-70 Stainless Steel T-Bolts Fasteners Supplier

A2-70 Stainless Steel T-Bolts Fasteners. China supplier for M6-M20, length 20-150 mm; packing and documents by RFQ.

Quick Specifications
Standard
Custom / application-based specification
Size Range
M6-M20, length 20-150 mm
Grade
A2-70
Material
Stainless steel
Finish
Plain
Thread Type
Full Thread

Product Overview & Available Options

Taiken supplies A2-70 Stainless Steel T-Bolts Fasteners — metric stainless steel bolts with a full thread — in sizes M6–M20, length 20–150 mm.

The A2-70 bolt is an A2-70 stainless steel bolt: A2 denotes the 304-type material and 70 denotes the 700 MPa tensile strength class, so buyers comparing 304 stainless steel bolts with A2-70 should confirm the strength class, not just the material family. An A2 70 bolt 10mm (M10) falls within the stocked M6–M20 range; confirm the exact A2 70 bolt thread size and A2-70 bolt size by RFQ with the channel profile or drawing. Unlike stainless steel curved head bolts, whose domed heads suit visible trim, this T-bolt has a flat T-head for slots and channels.

Taiken supplies A2-70 stainless steel T-bolts for channel, slot, fixture, and equipment assemblies where the T-head must fit a specific rail or profile. Because T-bolts are often application-based, the head width, head thickness, shank length, thread length, and slot compatibility should be checked from the buyer’s drawing or sample.

A2-70 stainless steel is commonly used in clean, humid, and protected exterior conditions, but it should not be assumed suitable for coastal or chloride-heavy exposure. If the joint carries structural load or safety-critical load, the required standard and test scope must be confirmed by the project engineer.

As a China supplier and sourcing partner, Taiken can support mixed T-bolt sizes, matching nuts and washers, packing labels, and applicable order documents for importers serving Southeast Asia, Middle East, and Central Asia markets.

The same A2-70 grade is also available as a stainless steel all thread stud bolt — see the A2-70 stainless steel stud bolt.

Dimensions & Technical Data

Key dimensional and mechanical values for this product.

Technical Specifications
Specification Value
Standard Custom / application-based specification
Thread Type Full Thread
Material Stainless steel
Packaging Bulk carton, pallet, custom label available
Lead Time Confirmed by order quantity
Custom Options Size, finish, packaging, and label confirmed by RFQ
Use Environment Clean indoor, humid, or protected exterior service; confirm A4 stainless for coastal or chloride-heavy exposure
Specification Value
Size Range M6-M20, length 20-150 mm
Grade A2-70
Finish Plain
MOQ Confirmed by size, grade, and order quantity
Certification / Documents ISO 9001 QMS, MTC, inspection report; SABER/SASO, ECAS/EQM, EAC or local CoC confirmed by importer requirement
Target Applications Channel assemblies, rail slots, fixtures, equipment mounting, drawing-based distributor stock
Buyer Note Provide drawing, sample, channel profile, head dimensions, thread length, and accessory requirements by RFQ

Materials, Grades & Surface Finishes

Use this item when the buyer can provide the channel or slot requirement and needs A2-70 stainless T-bolts for clean or moderately corrosive service. Available sizes are M6–M20, length 20–150 mm — confirm the exact diameter, length and T-head width by RFQ with the channel profile or drawing.

Application Material / Grade / Finish
Profile-fit driven item Head dimensions must match the slot or channel, so drawings or samples are more important than a generic name.
A2-70 stainless grade Commonly used in clean indoor, humid, and protected exterior applications where carbon steel is not preferred.
Length and thread control Shank length, thread length, and total length should be specified separately to avoid assembly mismatch.
Accessory matching Can be quoted with compatible nuts and washers when the mating hardware is provided in the RFQ.
Order-based documents Inspection and material documents can be reviewed where applicable to the actual product and batch.
A2-70 bolt strength A2-70: 700 MPa tensile strength and 450 MPa 0.2% proof stress (ISO 3506-1); load capacity depends on dimensions and channel design — use project-approved data for load-critical applications.
Full thread bolt standard Each size is supplied as a full thread bolt; the stainless steel bolt grade A2-70 is listed in the specification table — the full thread bolt standard for this range follows the application specification.

Applications & Limitations

Recommended for application-based T-bolt orders where slot fit, stainless grade, and accessory matching are confirmed.

Channel and rail assemblies

Used where a T-head locks into a channel, profile, or slot and requires a controlled head shape.

Fixture and equipment mounting

Suitable for non-marine equipment fixtures after load, slot size, and mating nut details are confirmed.

Distributor special fastener stock

Supports importers that stock drawing-based T-bolts across several lengths and thread sizes.

Mixed accessory shipments

Can be consolidated with nuts, flat washers, spring washers, or other related fasteners by size list. Wholesale A2-70 Stainless Steel T-Bolts — mixed sizes M6–M20 and distributor programs quoted by RFQ.

Quality, Documents, Packaging & Delivery

Our quality coordination covers sourcing, inspection, packaging and documentation.

Inspection & Testing

  • Dimensional verification (thread gauge, caliper, micrometer)
  • Hardness testing (Rockwell / Brinell)
  • Tensile and proof load testing
  • Coating thickness measurement
  • Visual and surface defect inspection
  • Third-party inspection arranged on request

Available Documents

  • Mill Test Certificate (EN 10204 3.1)
  • Certificate of Conformance
  • Inspection Report with photos
  • Material Test Report
  • Coating / Plating Certificate
  • Packing List and commercial documents

Packaging Options

  • Bulk carton (25 kg standard)
  • Small box (per specification count)
  • Plastic bag + carton
  • Pallet with stretch wrap or fumigation
  • Private label: custom box, label, barcode
  • Moisture-resistant packaging on request

MOQ & Delivery

  • MOQ confirmed by specification, grade and packaging
  • Lead time typically 15–35 days depending on order
  • Mixed container with other fastener products
  • FOB / CIF / CFR terms available
  • Partial shipment and split delivery on request
  • Pre-shipment inspection before loading

Frequently Asked Questions

What dimensions are critical for T-bolts?

Head width, head thickness, neck shape, shank diameter, thread length, and total length are critical because they control slot fit.

Can Taiken quote without a drawing?

A drawing, sample, or channel profile is strongly recommended. Without it, the quotation should be treated as preliminary.

Is A2-70 suitable for outdoor mounting?

It can suit protected exterior use, but coastal or chloride exposure should be reviewed for A4 stainless steel or another material.

Can nuts and washers be supplied together?

Yes, matching nuts and washers can be quoted when standards, grades, and packing rules are provided.

Are load values fixed for this product family?

No. Load capacity depends on dimensions, material, channel design, and installation. Use project-approved data for load-critical applications.

A2-70 stainless steel vs 304 — are they the same?

Close but not identical. A2 is the ISO grade for 304-type stainless steel; 70 is the property class (700 MPa tensile). An A2-70 bolt is therefore a 304-family bolt at the 70 strength class — confirm the class on the drawing.

Ready to Source?

Let's Discuss Your Fastener Requirements

Send us your specifications, BOM or drawing. We typically respond within 24 business hours.

Response within 24 hours
BOM & drawing review available
Multi-SKU consolidated orders